Video - Sony WEGA KE-37XS910 Operating Instructions Manual

Video
No picture (screen not lit), no If your TV does not tum on, and a red light keeps flashing, your TV may need
sound service. Call your local Sony Service Center.
Make sure the power cord is plugged in.
Press on the right side of the TV.
Press to cycle through the connected video sources.
Try another channel: it could be station trouble.
Press
so that the PICUTRE OFF LED on the display unit goes olI:
Dark, poor or no picture Adjust the : option in the Video Menu (see page 84).
(screen lit), good sound Adjust the option in the Video Menu (see page 84).
Check the antenna cable connections.
No color Adjust the option in the Video Menu (see page 84).
Only snow and noise appear on Check the antenna:cable connections.
the screen Try another channel: it could be station trouble.
Press to change the input mode (see page 51).
Dotted lines or stripes Adjust the antenna.
Move the TV away from noise sources such as cars, neon signs, or hair-dryers.
Double images or ghosts Using a highly directional outdoor antenna or a cable may solve the problem.
"Black box" on screen You have selected a text option in the Setup Menu and no text is available. To turn
off this feature, set the option to . If you were trying to select
closed captioning, select instead of .
Black bands appear at the top Some wide-screen programs are filmed in aspect ratios that are greater than 16:9
and bottom of the screen (this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of the screen. For more details,
check the documentation that came with your DVD (or contact your program
provider).
Striped noise during Video head interference. Keep your VCR away l_com the TV.
playback recording of a VCR Leave a space of 30 cm (11 78 inches) bet_veen your VCR and the TV to avoid
noise.
Avoid installing your VCR in front of the TV or at the side of the TV.
The screen flickers when This is caused by feature of the Plasma Display Panel, and does not indicate a
turning on the TV malfunction of the TV.
Certain programs on DVD or The compression used by certain digital broadcasts and DVDs may cause your
other digital sources display a TV's screen to display less detail than usual, or cause artifacts (small blocks or
loss of detail, especially during dots, pixelations) to appear on your screen. This is due to your TV's large screen
_ast-motion or dark scenes and ability to show very fine detail, and is nomlal for certain digitally recorded
programs. Adjust the reality clarity in the DRC Palette menu (see page 85) to
optimize the picture while viewing these sources.