Cable Box And Cable Only - Sony WEGA KE-37XS910 Operating Instructions Manual

Cable Box and Cable
Only
Your cable company scrambles some channels, such as prelnium
channels (which requires you to use a cable box), but does not scramble
all channels.
You do not have a VCR. (If you have a VCR, see pages 30 and 32.)
Use the TV remote control to change channels coming through the cable
box to the ]V's AUX input jack. (You must first pro m'am the remote
control for your specific cable box; see "Pro_amming the Remote
Control" on page 52.)
Use the TV remote control to change channels coming directly into the
TV's VHF/UHF input. (The TV's tuner provides a better signal than the
cable box.)
Connect your cable company to the TV's VHF/UHF jack using the
supplied antenna cable.
Use a coaxial cable to connect the TV's TO CONVERTER jack to the
cable box's input jack. (The TV's intemat converter lets you switch
between unscrambled signals coming straight into the TV and
scrambled signals coming in through the cable box, eliminating the need
for an external splitter.)
Use a coaxial cable to connect the cable box's output jack to the TV's
AUX jack.
Run the Auto Setup program, as described in "Setting Up the Channel
List" on page 48.
1
Antenna cable
(supplied)
2 3
Coaxial cable
(not supplied)
IN _ OUT