Using The Remote Control - Sony FD Trinitron WEGA KV-32FS13 Operating Instructions Manual

Using the Remote Control
Button Description
[] MUTING Instantly turns off the sound. Press again or press
vo. to restore sound.
[] SYSTEM OFF Powers off all Sony equipment at once, (may not
work with older equipment).
[] TV/VCR Press when you are finished using a VCR and you
want to switch to the TV input. Your VCR power
will relrlain on.
[] ANT (antenna)
Press to change the VHF/UHF input to the AUX
input (KV-27FS17, KV-27FV17, KV-32FS17 only).
[] PICTURE MODE
Cycles through the available Video Mode settings.
[] SLEEP
Turns the TV off automatically in approximately
15, 30, 45, 60, 90, or 120 minutes. Cancel by
pressing until SLEEP OFF appears.
[] JUMP Alternates between the last two channels selected
with the (_)-(_) buttons.
[] @ Cycles through available Steady Sound settings,
(see page 24).
Tc_8i(r
[] RESET Press to return to factory settings while in an on-
screen menu.
[] VOL (volume)
Press when you want to adjust the volume.
[] CODE SET Use to program your remote control to operate
connected video equipment, (see page 37).
[] POWER Press when you want to turn colmected
equipment on and off.
[] FUNCTION
Press when you want to control connected
equipment with your remote control.
[] Picture in Picture Operates PIP feature. To use the PIP feature, see
(PIP)
page 18.
[] W/VIDEO
Cycles through available video inputs.
[] DISPLAY
Press once to show current time, (if set) and
channel number. Press again to turn DISPLAY off.
The remote control shown on page i4 (RM-Y181) is for KW27FS17,
KV-27FV17, and KV-32FS17: Your remote control may not look like the one
illustrated.
(continued)
1S