Sony FD Trinitron WEGA KV-32FS13 Operating Instructions Manual page 36

Channel Fix 2-6: Select when you want to control all channel
selection
through a cable box or VCR. Select the appropriate channel
(usually 3 or 4) and use the cable box's or VCR's remote
control for chal_lel selection.
Video 1 : Select from available video inputs when you have
connected video equipment (e.g. satellite receiver) and you
want your TV fixed to it.
AUX 2-6: Use this setting instead of the 2-6 if you want to
change channels using a cable box, VCR or satellite
receiver and you've connected it to the AUX input.
Auto Program Perform Auto Program whenever setting up your TV.
It will cycle through all available channels and program
any receivable channels.
Channel
Use this feature after you run Auto Program to skip
Skip/Add unwanted channels or add new ones.
1 Use the (_)-(_) buttons or the [CH+/-] buttons to select
the channel.
2 Press ¢2D to Skip or Add (only one option will be
available).
Channel
With the Channel Label window open:
Label 1 Press ¢Z), then press _ or _ until you reach the desired
Label up to 40 channel number.
channels with 2 Press ¢2D to activate the channel.
th_'ir call letters 3 Press _ then press C2D to highlight the label field.
4 Press ¢ or _ to display the first call letter or number of
the caption and press _ to select it. When finished,
press CE:) to activate.
_a Favorite Channel, Channel Skip!Add, and Channel Label cannot be Used
when Channel Fix is set.
27