Sony FD Trinitron WEGA KV-32FS13 Operating Instructions Manual page 14

Cable Box and Cable
Use this connection if you subscribe to a cable system that scrambles
some channels (pay channels), but not all of them. This set up allows you
to use the remote control to:
a) change channels through your cable box when you are receiving a
scrambled signal, and
b) change channels through your TV.
This connection also allows you to use the PIP feature when you are
viewing unscrambled channels coming directly into your TV from your
cable. Scrambled signals coming through the cable box cannot be viewed
in PIP. For more information on the PIP feature, see page 18.
Cable Box
I
Coaxial Cable
2
I
75-ohm coaxial cable
CATV cable (unscrambled Channels)
rear ofTV
1
2
3
Connect the coaxial cable from your cable service to the VHF/UHF
jack on your TV.
Using a coaxial cable (not supplied), connect the IN jack on your
cable box to the TO CONVERTER jack on your TV.
Using a coaxial cable (not supplied), connect the OUT jack on your
cable box to the AUX jack on your TV.
d_a Pressing the _
DUTIOn
on me remote
conIroI switches Detween (ne cable
DOX anCI alrecT CaDle InDUTS.
Your Sor _ remote comrol can De programmea to oDerate your cable DOX.
see aage 37).
_'_ To use the cae)Je POXto cnange your channels, set your TV to channel 3 or 4
Setting the Channel Fix feature w assure you (:ion t acclclental y switcn The
cnanneJs using your T_L(see aacle 27).
5