Page 1
INSTRUCTION MANUAL Angle Grinder MT900 MT901 006770 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH SPECIFICATIONS Model MT900 MT901 Depressed center wheel diameter 180 mm 230 mm Spindle thread No load speed (min 8,500 6,600 Overall length 468 mm 468 mm Net weight 4.7 kg 4.7 kg Safety class • Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
Keep children away. switch. Ensure switch is off when plugging in. Do not let visitors touch the tool or extension cord. 18. Use outdoor extension leads. All visitors should be kept away from work area. When tool is used outdoors, use only extension Store idle tools.
Handle and store wheels with care. lateral pressure. Do not use separate reducing bushings or SAVE THESE INSTRUCTIONS. adaptors to adapt large hole abrasive wheels. Use only flanges specified for this tool. Do not damage the spindle, the flange FUNCTIONAL DESCRIPTION (especially the installing surface) or the lock nut.
Page 5
To start the tool, push in the lock lever (in the A direction) the operator. and then pull the switch trigger (in the B direction). Mount the wheel guard with the protrusion on the wheel Release the switch trigger to stop. guard band aligned with the notch on the bearing box.
Installing or removing cut-off wheel Grinding and sanding operation ALWAYS hold the tool firmly with one hand on rear 1. Lock nut handle and the other on the side handle. Turn the tool on 2. Outer flange 78 3. Cut-off wheel and then apply the wheel or disc to the workpiece.