Table of Contents
Advertisement
Set up voicemail with dialing codes
1 At the Start screen, press Menu 01-11-2 (Messages > Voice
messages > Voice mailbox number).
The Mailbox number box appears.
2 Refer to the dialing codes table above and enter any codes as necessary
along with the information that you wrote down earlier.
For example, if you have to pause for 5 seconds after connection
to voicemail, enter p twice (after the voice mailbox number).
Example: 2145551212pp.
3 Enter any remaining pauses, PIN codes, and other information that
7
allows you to listen to your messages and press OK.
Now to dial and listen to your voicemail, just press and hold
No other keypresses should be necessary.
• USE VOICE DIALING
Your phone's voice dialing feature allows handsfree operation while you
place a call. Before using this feature, you need to create entries in the
phone book so you can associate a "voice tag" with a name and number.
Add a voice tag to a phone book entry
To create entries in the phone book, see "Add an entry to the Phone book"
on page 45.
1 At the Start screen, scroll to the name you want to give a voice tag.
2 Press Details, then Options.
Add voice tag appears highlighted.
3 Press Select. The phone displays Press Start, then speak after tone.
4 Press Start.
You will hear several beeps, and Please speak now appears.
5 Speak clearly into the microphone.
Note: Do not press Quit unless you want to cancel the recording.
[ 64 ]
.
Advertisement
Table of Contents
