Table of Contents
Advertisement
SET UP THE LOOPSET PROFILE
The LPS-3 Loopset gives people with T-coil equipped hearing aids the
ability to make and receive calls without noise interference.
Important: Refer to the booklet that comes with the LPS-3 for
complete instructions and safety information.
1 Plug the loopset jack into the bottom of your phone.
2 Press Menu 4-5-3 (Settings > Accessory settings > Loopset).
3 Scroll to Use loopset, then press Select.
4 Scroll to Yes, then press Select.
Note: The headset is the default accessory. If you follow steps 1
through 4 above, you set the loopset as the default accessory
recognized by your phone.
SET UP CAR PROFILE
If you are using your phone with a Nokia-approved car kit, you can set lights
to On (lights stay on) or Automatic (after 15 seconds, lights turn off until
the next key is pressed or the phone rings).
ADJUST VOLUME CONTROL
You set your volume by adjusting the earpiece volume buttons. See
"Understand your phone" on page 10 for an illustration of volume
control keys located on the left side of the Nokia 6590i phone.
• CHOOSE THE DISPLAY LANGUAGE
You can choose your phone's display language.
1 Press Menu 4-3-1 (Settings > Phone settings > Language).
2 Scroll to the language you want, then press Select.
Personalize your phone
[ 95 ]
9
Advertisement
Table of Contents
