Nokia 6500 SLIDE RM-240 Service Manual
  1. Manuals
  2. Brands
  3. Nokia Manuals
  4. Cell Phone
  5. 6500 SLIDE RM-240 Service
  6. Service manual

Nokia 6500 SLIDE RM-240 Service Manual

Care level 1&2
Hide thumbs Also See for 6500 SLIDE RM-240:
Table of Contents

Advertisement

Quick Links

Page

(25)
SERVICE MANUAL
Level &2
RM-240
Transceiver characteristics:
Transceiver with BP-5M Li-Ion battery pack
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
Band:
EGSM: Quad-band 850/900/1800/1900MHz
WCDMA: 850/2100MHz
Display:
LCD: 5.588cm QVGA (2.2") (320x240 pixel); 16M colors
Camera:
Camera: 3.2 Megapixel, 8x digital zoom, autofocus, flash
Operating System:
Series 40
Connections:
Wireless: Bluetooth
Connector: Micro USB Connector; AV Connector
Memory:
MicroSD™ (max 4GB)
Talk time
up to 6h
up to 13days
6500 Slide RM-240
Service Manual Level &2
Standby
Note
Depends on network
parameters
ISSUE 

Advertisement

Table of Contents
loading

Related Manuals for Nokia 6500 SLIDE RM-240

Summary of Contents for Nokia 6500 SLIDE RM-240

  • Page 1 Connector: Micro USB Connector; AV Connector Memory: MicroSD™ (max 4GB) Transceiver with BP-5M Li-Ion battery pack Talk time Standby Note Depends on network up to 6h up to 13days parameters Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 2 TABLE OF CONTENTS Page CHANGE HISTORY COPYRIGHT WARNINGS AND CAUTIONS ESD PROTECTION CARE AND MAINTENANCE BATTERY INFORMATION EXPLODED VIEW LEVEL 2 SOLDER COMPONENTS SERVICE TOOLS SW-UPDATE DISASSEMBLY ASSEMBLY Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.

  • Page 3: Change History

    First arroved release The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential.

  • Page 4: Warnings And Cautions

    5. Ensure all cables and wires are repositioned correctly. ESD PROTECTION Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the phone. Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced without ESD protection if the product is otherwise ready for use.

  • Page 5: Care And Maintenance

    A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries’ performance is particularly limited in temperatures well below freezing. dispose batteries fire! Dispose batteries according local regulations (e.g. recycling). Do not dispose as household waste. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.

  • Page 6: Exploded View 6

    6500 Slide RM-240 Service Manual Level &2 EXPLODED VIEW See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.

  • Page 7: Level 2 Solder Components 7

    6500 Slide RM-240 Service Manual Level &2 LEVEL 2 SOLDER COMPONENTS Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.

  • Page 8: Service Tools 8

    Service Bulletin (SB-011) on NOKIA On- line. Supplier or manufacturer contacts for tool re-order can be found in “Recom- mended service equipment” docu- ment on NOKIA Online. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.

  • Page 9: Sw-Update 9

    To use FLS-5 Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 10 Service Manual Level &2 DISASSEMBLY 1. Nokia 6500 Slide disassembly. 2. You will need the Nokia Standard Toolkit version 2. 3. Unlock and remove the BATTERY COVER. 4. Equip your bitholder with the Torx Plus size 4 bit. 5. Unscrew these 4 screws in the order shown.
  • Page 11 13. Insert the SS-93 at the shown position. 14. Carefully unlock this flex foil connector. 15. Lift up the BOTTOM KEYMAT SUPPORT. 16. Disconnect this flex foil connector. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 12 23. Carefully press at both edges,- like shown before. Lift out 24. Locate the small recesses. shift the clip of the BOTTOM the BOTTOM KEYMAT SUPPORT. KEYMAT outside. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 13 30. Keep this adhesive clean if this part should be reused. Remove all adhesive residues from the SLIDE MODULE ASSY. 31. Unscrew these screws in the shown order. 32. Discard these screws. Do not use them again. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 14 38. Shift the slider into position shown to reach the maximum recess. Slot the connector through the slider. 39. Open the clips of the TOP KEYMAT SUPPORT... 40..on both sides. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 15 46. Discard this EARPIECE. Do not use it again. 47. Bend the top part of the cover. Twist out the glued in 48. These parts can be separated if necessary. EARPIECE HOUSING ASSEMBLY. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 16 55. Now the CAMERA FLEX MODULE can be removed together 56. Slightly bend the D-COVER in order to release the clip. Do not with the CAMERA MODULE. touch the components or the spring contact. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 17 60. Lift up the DC PLUG. ASSEMBLY. 61. Lift out the FLASH ASSEMBLY. 62. Keep this adhesive clean if this part should be reused. The disassembly procedure is now complete. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 18 6500 Slide RM-240 Service Manual Level &2 ASSEMBLY 1. Nokia 6500 Slide assembly. 2. You will need the Nokia Standard Toolkit version 2. 3. Place the FLASH ASSEMBLY. Remove the protective film if this 4. Push it down slightly. part is new.
  • Page 19 13. Close the flex connector of the camera. 14. Insert the EARPIECE HOUSING ASSEMBLY into the A-COVER. 15. Click it into its place correctly. 16. Remove the protective film from the EARPIECE. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 20 22. Place the TOP FLEX ASSEMBLY. Remove the protective film before if this part is new. 23. Slightly push the CMOS CAMERA into its compartment. 24. Mind the guiding pin of the TOP FLEX ASSEMBLY. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 21 30. Insert the TOP KEYMAT SUPPORT, beginning from the top. MODULE part as shown before. 31. Click both clips into their places. 32. Shift open the SLIDE MODULE ASSEMBLY partly... Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 22 36. Set the correct torque. 37. Tighten both screws in the order shown. 38. Close the slider. 39. Insert the next 2 screws. 40. Check the torque of the tool. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 23 46. Use the tape to align the connector correctly. Close the connector and remove the tape. 47.Place the upper part over the D-COVER. Do not click it into its 48. Shift open the assembly. place yet. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 24 53. Close the assembly. Click all snaps into their places. 54. Insert the 4 new screws. 55. Set the correct torque. 56. Tighten all screws with the correct torque in the order shown. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.
  • Page 25 6500 Slide RM-240 Service Manual Level &2 57. Insert the BOTTOM KEYMAT. 58. Place the BATTERY COVER. 59. At least check the functionality of the slider and the Keys. Page (25) ISSUE  CONFIDENTIAL Copyright © 2007 NOKIA. All rights reserved.

This manual is also suitable for:

6500 slide

Table of Contents