Setting The Alarm; Switching The Alarm On; Switching The Alarm Off; Sleep-Timer - Silvercrest KH 2322 Operating Instructions Manual

Adjusting Alarm Settings
If the clock is set correctly, as described
above:
NOTE: The time and alarm settings
can be made without the insertion
of batteries, however, the appliance
then needs to be connected to mains
power. The power failure protection
is not in effect.
➪ Whilst holding down the button AL.
SET :
➪ Press several times in succession, or
simply hold down, the button HOUR
to adjust the hours.
➪ Release the button HOUR
the desired hour setting is shown in
the Display .
➪ Press several times in succession, or
simply hold down, the button MINUTE
, to adjust the minutes.
➪ Release the button MINUTE
the desired hour setting is shown in
the Display .
The adjusted alarm time is automatically
taken over as soon as the button AL. SET
is released.

Switching the Alarm ON

If the clock and alarm time are set
correctly, as described above:
➪ Set the rotating switch
position OFF/AUTO.
➪ Press the button AL. ON/OFF
switch on the alarm function. In the
Display appears ALARM.
You will be awakened by the radio if ...
➪ the volume adjuster VOLUME
at a volume level that will wake you.
You will be awakened by the signal tone
if...
➪ the volume adjuster VOLUME
turned so far down that it has switched
itself off with an audible click, i.e. it
is in the position BUZZ.

Switching the Alarm OFF

➪ Press the button SNOOZE
alarm will repeat itself after 5 minutes.
➪ Shortly press the button AL. ON/OFF
when
the next day. In the Display
is still to be seen.
➪ Press the button AL. ON/OFF
to completely deactivate the alarm
function.
when In the Display
disappears.
Sleep Timer
If you would like to listen to the radio
for a while before going to sleep and
would like the radio to switch itself off:
➪ Place the rotating switch
positionOFF/AUTO.
➪ Press the button SLEEP
switches itself on after ca. 2-3 seconds
into the and plays for 90 minutes.
In the Display
to several seconds.
- 7 -
SilverCrest KH 2322
to activate the alarm function for
the ALARM sign
, SLEEP blinks for
is set
is
, and the
ALARM
twice
into the
. The radio