Connecting external playback devices (AUX IN mode)
In AUX IN mode, you can connect external playback devices such as a smart-
phone or an MP3 player to use them as the playback source for the radio .
NOTE
►
Switch the radio and the external playback device off before connecting
them . Note also the operating instructions for the device that you want to
connect to the radio .
♦
Connect the external playback device to the AUX IN socket
using the supplied AUX cable .
♦
Briefly press the
♦
Briefly press the SOURCE /
AUX IN appears on the display
♦
Turn on the external playback device and start playback .
♦
Afterwards, set the desired volume using the VOLUME |
SCAN dial
the external playback device .
♦
To exit AUX IN mode, turn off the radio and the external playback device .
Remove the AUX cable from the AUX IN socket
Alternatively, you can press the SOURCE /
from AUX IN mode to radio mode or Bluetooth
Connecting headphones
CAUTION
Take care when using headphones .
Listening to music on headphones for long periods and at high volume levels
can lead to hearing damage .
►
Always start by setting a low volume and then adjust it to a comfortable
level .
►
Always use headphones in such a way that you can still hear ambient
noise .
■
24
GB │ IE │ NI
│
button
to switch on the radio .
2
button
1
on the radio . Alternatively, you can increase the volume on
6
(several times if necessary) until
3
.
of the radio .
w
button
to switch directly
3
mode .
®
of the radio
w
ENTER /
SRH 5 C3