Teac Pico-1 User Manual page 24

5. Pressing the MODE key from the display shown above will change
the display again:
6. Press the ENTER key from this screen to exit the audio play mode
and return to the main mode selection screen. An appropriate er-
ror message is displayed if there is no disc in the drive (No disc
or if the disc is unreadable for any reason (it is not a finalized disc,
or is wrongly inserted into the drive, does not contain audio data,
etc. (Bad disc
Bad disc)). Bad disc Bad disc
Bad disc
If the master drive does not contain a CD or the CD is not of the audio
type you will get this message:
NOTE
If the copied CD contains audio errors, you will be able to
hear them, but no message will appear on the display. If a
copied CD contains audible errors, you may want to consider
rerecording at a lower speed, which will almost certainly re-
duce the error rate.
56
Track 05 Play Track 05 Play
Track 05 Play Track 05 Play Track 05 Play
3 Exit 3 Exit 3 Exit
3 Exit 3 Exit
Error Error Error
Error Error
Master:No disc Master:No disc
Master:No disc Master:No disc Master:No disc
No disc No disc
No disc), No disc
3. Modes