To prevent electrical shock, do not attempt to disassemble the DVD Duplicator system. Refer servicing to authorized personnel. TEAC DVD Duplicator drives utilize a laser beam that can be harmful to your eyes. Do not disassemble the cabinet or unit. Do not attempt to look through the front panel or into the unit while the power is turned on.
Copying audio, video, or software without the permission of the copyright holder is illegal. TEAC accepts no responsibility for copyright infringement or misuse of this equipment. It is the sole responsibility of the user to ensure that the legal copyrights of the copyright owners are respected.
It is an ideal DVD Duplicator for the advanced user who requires speed and accuracy. You can set up your TEAC Tower DVD Duplicator very quickly and easily. There is no need to install any software. There is no need to attach any cables to your computer.
DVD Duplicator Package Contents DVD Duplicator Package Contents Your TEAC DVD Duplicator package includes the following items (see Figure 1). ❑ TEAC (1x3 or 1x7) Tower DVD Duplicator unit ❑ AC power cable ❑ TEAC Tower DVD Duplicator User’s Manual (this booklet) User’s Manual...
You can close the tray by pressing the eject button. Notes: ❑ TEAC strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray. ❑ The Tower DVD Duplicator may include an internal hard disk drive as an alternate source drive.
You can close the tray by pressing the eject button. Note: TEAC strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk electrical shock or damage to the unit. Note: To ensure proper operation, use only the original AC power cable with your TEAC Tower DVD Duplicator unit. TEAC Tower DVD Duplicator User’s Manual...
Page 14
Rear Panel TEAC Tower DVD Duplicator User’s Manual...
LCD display is tested. Once the initialization is complete, the DVD Duplicator is ready for use. The LCD initially displays the Copy function by default. Figure 5. Copy Function on LCD Panel TEAC Tower DVD Duplicator User’s Manual...
Press the eject button again to retract the disc tray. You can change the default settings by using the [Advanced Setup] menu. (For more information, see “12 Advanced Setup (Adv Setup)” on page 20.) TEAC Tower DVD Duplicator User’s Manual...
The LCD will display a message similar to the following for each corresponding partition: Select a Partition No image in A TEAC Tower DVD Duplicator User’s Manual...
Page 18
The data (image file) on the DVD in the source drive will be copied onto the partition you selected in Step 5. Note: To help you quickly locate your data in the future, TEAC recommends that you keep track of the data that you load into each partition.
Page 19
(If you selected partition B, the LCD will display the message: “ ,” and so on. 1 Copy. P : B 16. Place a blank DVD-R disc into each of the target drives, then press the button to start copying. (ENT) TEAC Tower DVD Duplicator User’s Manual...
Page 20
Then press the eject button again to retract the disc tray. You can change the default settings by using the [Advanced Setup] menu. (See “12 Advanced Setup (Adv Setup)” on page 20.) TEAC Tower DVD Duplicator User’s Manual...
Discs will remain blank Test after the test is complete. This function is recommended if you are using unsupported media. This function enables the target drive to adjust its laser to the proper intensity. TEAC Tower DVD Duplicator User’s Manual...
Writer drive, or hard disk drive) as the source from which to copy. You can select a hard disk drive only on those Tower DVD Duplicator systems that feature a factory-installed hard disk drive. TEAC Tower DVD Duplicator User’s Manual...
9.6 Image Src Drive Use the function to select the DVD-ROM drive or a DVD Writer Image Src Drive drive as the source from which you can load data into a particular partition as an image file. TEAC Tower DVD Duplicator User’s Manual...
The volume knob on the front of the drive controls the audio volume level. The arrow buttons on the LCD panel enable you to skip to the next track (forward or back). TEAC Tower DVD Duplicator User’s Manual...
Various settings are available under the menu that Setup control the operation of the DVD Duplicator. However, TEAC recommends that you use the original default settings for optimal operation. 11.1 Language The DVD Duplicator LCD panel can display text in English and Spanish. The function enables you to select the display language.
, the DVD Duplicator first loads the data into a partition on the hard disk drive, then copies the data to the target DVDs. This function is valid only on Tower DVD Duplicators that feature an internal hard disk drive. TEAC Tower DVD Duplicator User’s Manual...
11.19 Auto Close Tray setting function closes the DVD writer’s tray automatically Auto Close Tray after the recording is completed and the disc has been ejected. It is related to function 11.5 Auto Start Drive TEAC Tower DVD Duplicator User’s Manual...
If the setting is , no messages will be displayed if an error occurs. The copy operation will be completed and the copy will include all errors detected during the process. The default setting is TEAC Tower DVD Duplicator User’s Manual...
CD or DVD disc. 12.9 H/W Diagnostic function detects the devices connected to the interface board, H/W Diagnostic confirms functionality, and displays information about the hardware on the LCD. TEAC Tower DVD Duplicator User’s Manual...
ISRC and MCN format support. ISRC & MCN The default setting is 12.13 Switch USB Mode function is not applicable to TEAC Tower DVD Switch USB Mode Duplicators. 12.14 CD-Text function enables or disables the copying of CD-Text discs. The...
All data on the disc will be lost. Confirm erasure request. Erase Finished The erasing of the data is complete. No Erasing to Disc in DVD- The disc in the DVD-RW drive is not rewritable. RW!! TEAC Tower DVD Duplicator User’s Manual...
Tgt overflow, del last trk? Disc capacity is insufficient to store the selected tracks. Do you want to delete the last track? Ins empty disc Continue? Do you want to insert a blank disc and continue copying? TEAC Tower DVD Duplicator User’s Manual...
Do not use benzene, alcohol, thinner, or other solvents. wipe disc surface from handle discs center to outside edge by their edges Figure 6. How to Handle Compact Discs (DVD-R and DVD-RW) TEAC Tower DVD Duplicator User’s Manual...
Then press the Eject button again to retract the disc tray back into the drive. Press the Eject button to extend and retract the disc tray. Figure 7. Ejecting the Disc Tray TEAC Tower DVD Duplicator User’s Manual...
Loading and Ejecting Discs Appendix D. Specifications The following table lists the product specifications for the TEAC Tower DVD Duplicator. Model DVW-D13 DVW-D13H DVW-D17 DVW-D17H HDD Capacity None 80GB None 80GB Weight 22 lbs. 23.5 lbs. 37 lbs. 38.5 lbs.
Please contact us at the addresses listed at the end of this warranty statement. WHAT TEAC WILL PAY FOR – We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.
Page 39
EXCLUSION OF DAMAGES TEAC’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT TEAC’S OPTION. TEAC SHALL NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR COMMERCIAL LOSS, LOST PROFITS OR ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR OTHERWISE.
Page 40
Limited Warranty TEAC Tower DVD Duplicator User’s Manual...