To prevent electrical shock, do not attempt to disassemble the CD Duplicator system. Refer servicing to authorized personnel. TEAC CD Duplicator drives utilize a laser beam that can be harmful to your eyes. Do not disassemble the cabinet or unit. Do not attempt to look through the front panel or into the unit while the power is turned on.
It is the sole responsibility of the user to ensure that the legal copyrights of the copyright owners are respected. About This Manual This TEAC Tower CD Duplicator User’s Manual explains how to operate the TEAC Tower CD Duplicator. It is divided into the following chapters: Chapter 1: Introduction This chapter describes the shipping package contents and introduces the TEAC Tower CD Duplicator.
It is an ideal CD duplicator for the advanced user who requires speed and accuracy. You can set up your TEAC Tower CD Duplicator very quickly and easily. There is no need to install any software. There is no need to attach any cables to your computer.
CD Duplicator Package Contents CD Duplicator Package Contents Your TEAC CD Duplicator package includes the following items (see Figure 1). ❑ TEAC (1x3 or 1x7) Tower CD Duplicator unit ❑ AC power cable ❑ TEAC Tower CD Duplicator User’s Manual (this booklet) User’s Manual...
You can close the tray by pressing the eject button. Notes: ❑ TEAC strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray. ❑ The Tower CD Duplicator may include an internal hard disk drive as an alternate source drive.
You can close the tray by pressing the eject button. Note: TEAC strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk electrical shock or damage to the unit. Note: To ensure proper operation, use only the original AC power cable with your TEAC Tower CD Duplicator unit. TEAC Tower CD Duplicator User’s Manual...
Page 14
Rear Panel TEAC Tower CD Duplicator User’s Manual...
LCD display is tested. Once the initialization is complete, the CD Duplicator is ready for use. The LCD initially displays the Copy function by default. Figure 5. Copy Function on LCD Panel TEAC Tower CD Duplicator User’s Manual...
Press the eject button again to retract the disc tray. You can change the default settings by using the [Advanced Setup] menu. (For more information, see “12 Advanced Setup (Adv Setup)” on page 19.) TEAC Tower CD Duplicator User’s Manual...
The LCD will display a message similar to the following for each corresponding partition: Select a Partition No image in A TEAC Tower CD Duplicator User’s Manual...
Page 18
The data (image file) on the CD in the source drive will be copied onto the partition you selected in Step 5. Note: To help you quickly locate your data in the future, TEAC recommends that you keep track of the data that you load into each partition.
Page 19
(If you selected partition B, the LCD will display the message: “ ,” and so on. 1 Copy. P : B 16. Place a blank CD-R disc into each of the target drives, then press the button to start copying. (ENT) TEAC Tower CD Duplicator User’s Manual...
Page 20
Then press the eject button again to retract the disc tray. You can change the default settings by using the [Advanced Setup] menu. (See “12 Advanced Setup (Adv Setup)” on page 19.) TEAC Tower CD Duplicator User’s Manual...
Discs will remain blank Test after the test is complete. This function is recommended if you are using unsupported media. This function enables the target drive to adjust its laser to the proper intensity. TEAC Tower CD Duplicator User’s Manual...
Writer drive, or hard disk drive) as the source from which to copy. You can select a hard disk drive only on those Tower CD Duplicator systems that feature a factory-installed hard disk drive. TEAC Tower CD Duplicator User’s Manual...
9.6 Select Src Drive Use the function to select the CD-ROM drive or a CD Writer Select Src Drive drive as the source from which you can load data into a particular partition as an image file. TEAC Tower CD Duplicator User’s Manual...
LCD panel enable you to skip to the next track (forward or back). 10.4 Close Session This function finalizes your CD-R disc. Once a CD-R disc is finalized, no more audio can be added to that disc. TEAC Tower CD Duplicator User’s Manual...
MAXIMUM, On occasion, using the maximum writing speed will cause copy failure due to poor quality CD-R discs or unstable high speed CD writing. In this case, TEAC recommends that you reduce the writing speed. 11.3 Read Speed function enables you to set the reading speed of the target drive.
11.11 Burn Mode setting enables you to select from three writing methods: Burn Mode ❑ Disc At Once (DAO) ❑ Track At Once (TAO) ❑ TAO Not Close is the default setting. TEAC Tower CD Duplicator User’s Manual...
12.1 UnderRun Protect setting turns Buffer UnderRun Protection on or off. The UnderRun Protect default setting is 12.2 Overburn setting turns the Overburn function in the target drive on or off. The Overburn default setting is TEAC Tower CD Duplicator User’s Manual...
The disc in the Burn-in target drive is ejected and re-inserted automatically between each test cycle. This function can be prepared to run continuously or specified to run from 1 to 1000 times. TEAC Tower CD Duplicator User’s Manual...
The default setting is 12.13 CD-Text function enables or disables the copying of CD-Text discs. The CD-Text default setting is 12.14 Switch USB Mode function is not applicable to TEAC Tower CD Duplicators. Switch USB Mode TEAC Tower CD Duplicator User’s Manual...
Page 30
12.14 Switch USB Mode TEAC Tower CD Duplicator User’s Manual...
All data on the disc will be lost. Confirm erasure request. Erase Finished The erasing of the data is complete. No Erasing to Disc in CD-RW!! The disc on the CD-RW device is not rewritable. TEAC Tower CD Duplicator User’s Manual...
Tgt overflow, del last trk? Disc capacity is insufficient to store the selected tracks. Do you want to delete the last track? Ins empty disc Continue? Do you want to insert a blank disc and continue copying? TEAC Tower CD Duplicator User’s Manual...
Do not use benzene, alcohol, thinner, or other solvents. wipe disc surface from handle discs center to outside edge by their edges Figure 6. How to Handle Compact Discs (CD-R and CD-RW) TEAC Tower CD Duplicator User’s Manual...
Then press the Eject button again to retract the disc tray back into the drive. Press the Eject button to extend and retract the disc tray. Figure 7. Ejecting the Disc Tray TEAC Tower CD Duplicator User’s Manual...
Loading and Ejecting Discs Appendix D. Specifications The following table lists the product specifications for the TEAC Tower CD Duplicator. Model CDW-D13 CDW-D13H CDW-D17 CDW-D17H HDD Capacity None 80GB None 80GB Weight 22 lbs. 23.5 lbs. 37 lbs. 38.5 lbs.
Please contact us at the addresses listed at the end of this warranty statement. WHAT TEAC WILL PAY FOR – We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.
Page 38
EXCLUSION OF DAMAGES TEAC’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT TEAC’S OPTION. TEAC SHALL NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR COMMERCIAL LOSS, LOST PROFITS OR ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR OTHERWISE.