To prevent electrical shock, do not attempt to disassemble the DVD Duplicator system. Refer servicing to authorized personnel. TEAC DVD Duplicator drives utilize a laser beam that can be harmful to your eyes. Do not disassemble the cabinet or unit. Do not attempt to look through the front panel or into the unit while the power is turned on.
Copying audio, video, or software without the permission of the copyright holder is illegal. TEAC accepts no responsibility for copyright infringement or misuse of this equipment. It is the sole responsibility of the user to ensure that the legal copyrights of the copyright owners are respected.
DVD Duplicator for the advanced user who requires speed and accuracy. You can set up your TEAC DVD Duplicator very quickly and easily. There is no need to install any software. There is no need to attach any cables to your computer.
DVD Duplicator Package Contents DVD Duplicator Package Contents Your TEAC DVD Duplicator package includes the following items (see Figure 1). ❑ TEAC (1x1) DVD Duplicator unit ❑ AC power cable ❑ TEAC DVD Duplicator User’s Manual (this booklet) User’s Manual...
The DVD Duplicator control panel features an LCD display and four buttons. These buttons are described in the following table: Press the Up arrow button to scroll up functions or menus. Press the Down arrow button to scroll down functions or menus. TEAC DVD Duplicator User’s Manual...
Page 12
You can close the tray by pressing the eject button. Notes: ❑ TEAC strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray. ❑ The DVD Duplicator may include an internal hard disk drive as an alternate source drive.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk electrical shock or damage to the unit. Note: To ensure proper operation, use only the original AC power cable with your TEAC DVD Duplicator unit. cooling fan: Ball-bearing fan cools the DVD Duplicator. TEAC DVD Duplicator User’s Manual...
Page 14
Rear Panel TEAC DVD Duplicator User’s Manual...
Note: The following instructions are applicable to both DVD Duplicator models DVW-D11 and DVW-D11H. Operational instructions for both models are essentially the same. The primary difference between models is that the DVW- D11H has an internal hard disk drive, which you can use as an alternate source drive.
Press the eject button again to retract the disc tray. You can change the default settings by using the [Advanced Setup] menu. (For more information, see “12 Advanced Setup (Adv Setup)” on page 19.) TEAC DVD Duplicator User’s Manual...
The LCD will display a message similar to the following for each corresponding partition: Select a Partition No image in A TEAC DVD Duplicator User’s Manual...
Page 18
The data (image file) on the DVD in the source drive will be copied onto the partition you selected in Step 5. Note: To help you quickly locate your data in the future, TEAC recommends that you keep track of the data that you load into each partition.
Page 19
(If you selected partition B, the LCD will display the message: “ ,” and so on. 1 Copy. P : B 16. Place a blank DVD-R disc into the target drive, then press the (ENT) button to start copying. TEAC DVD Duplicator User’s Manual...
Page 20
Then press the eject button again to retract the disc tray. You can change the default settings by using the [Advanced Setup] menu. (See “12 Advanced Setup (Adv Setup)” on page 19.) TEAC DVD Duplicator User’s Manual...
Discs will remain blank Test after the test is complete. This function is recommended if you are using unsupported media. This function enables the target drive to adjust its laser to the proper intensity. TEAC DVD Duplicator User’s Manual...
Select Source Writer drive, or hard disk drive) as the source from which to copy. You can select a hard disk drive only on those DVD Duplicator systems that feature a factory- installed hard disk drive. TEAC DVD Duplicator User’s Manual...
9.6 Image Src Drive Use the function to select the DVD-ROM drive or the DVD Image Src Drive Writer drive as the source from which you can load data into a particular partition as an image file. TEAC DVD Duplicator User’s Manual...
You can connect standard multimedia speakers to the audio jack of the designated source drive. The volume knob on the front of the drive controls the audio volume level. The arrow buttons on the LCD panel enable you to skip to the next track (forward or back). TEAC DVD Duplicator User’s Manual...
Various settings are available under the menu that Setup control the operation of the DVD Duplicator. However, TEAC recommends that you use the original default settings for optimal operation. 11.1 Language The DVD Duplicator LCD panel can display text in English and Spanish. The function enables you to select the display language.
, the DVD Duplicator first loads the data into a partition on the hard disk drive, then copies the data to the target DVD. This function is valid only on DVD Duplicators that feature an internal hard disk drive. TEAC DVD Duplicator User’s Manual...
Advanced Setup You should make changes only after you become completely familiar with the functions in this menu. To enter mode, press the button for Advanced Setup two (2) seconds. TEAC DVD Duplicator User’s Manual...
This function is reserved for factory use only. option is valid only on DVD Duplicators that feature a factory- Verify HDD installed hard disk drive. The factory-installed hard disk drive has already been partitioned and formatted and is ready for use. TEAC DVD Duplicator User’s Manual...
Note: The CD+G value must be set to OFF before you can use the Track Extraction features. 12.12 ISRC & MCN function enables or disables ISRC and MCN format support. ISRC & MCN The default setting is TEAC DVD Duplicator User’s Manual...
12.13 CD-Text 12.13 CD-Text function enables or disables the copying of CD-Text discs. The CD-Text default setting is 12.14 Switch USB Mode function is not applicable to TEAC DVD Duplicators. Switch USB Mode TEAC DVD Duplicator User’s Manual...
All data will be lost, erase? All data on the disc will be lost. Confirm erasure request. Erase Finished The erasing of the data is complete. No Erasable Disc in DVD-RW!! The disc in the DVD-RW drive is not rewritable. TEAC DVD Duplicator User’s Manual...
Tgt overflow, del last trk? Disc capacity is insufficient to store the selected tracks. Do you want to delete the last track? Ins empty disc Continue? Do you want to insert a blank disc and continue copying? TEAC DVD Duplicator User’s Manual...
Do not use benzene, alcohol, thinner, or other solvents. wipe disc surface from handle discs center to outside edge by their edges Figure 6. How to Handle Compact Discs (DVD-R and DVD-RW) TEAC DVD Duplicator User’s Manual...
Then press the Eject button again to retract the disc tray back into the drive. Press the Eject button to extend and retract the disc tray. Figure 7. Ejecting the Disc Tray TEAC DVD Duplicator User’s Manual...
Loading and Ejecting Discs Appendix D. Specifications The following table lists the product specifications for the TEAC DVD Duplicator. Model DVW-D11 DVW-D11H HDD Capacity None 80GB Weight 11.65 lbs. 13.15 lbs. Dimensions (HxWxD) 6.7" x 7.5" x 17.2" DVD Recorder...
Please contact us at the addresses listed at the end of this warranty statement. WHAT TEAC WILL PAY FOR – We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.
Page 38
EXCLUSION OF DAMAGES TEAC’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT TEAC’S OPTION. TEAC SHALL NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR COMMERCIAL LOSS, LOST PROFITS OR ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR OTHERWISE.
Need help?
Do you have a question about the DVW-D11 and is the answer not in the manual?
Questions and answers