Teac Pico-1 User Manual page 20

Cd copy station

Table of Contents

The message above will also be shown if the slave disc is of a smaller

capacity than the source disc. In these instances, it is impossible to

copy from the master to the slave disc. If the master disc is scratched,

damaged or unreadable for any reason, the copy process will halt, and

the display will appear as below.

If the slave disc is scratched, damaged or otherwise unwritable, the

display will appear as below.

If master CDs shall be copied which can't be read or which contain a

copy protection this message appears:

In the event of any of these errors being displayed, pressing the MODE

key will return to the main mode selection menu. Correct the problem,

if possible (replace the offending disc correctly in the disc tray, try again

with a different disc, etc.) before attempting the copy operation again.

Error

Master:Bad disc

Error

Slave:Bad disc

Copy failed

Master:Disc Err

3. Modes

Table of Contents