Interference Problems. It is available from the U.S. Government Printing Office, Washington, D.C. 20402, stock number 004-000-00345-4. The user is cautioned that any changes or modifications not expressly approved by TEAC America, Inc. could void the user’s warranty. TEAC CDW-D11 User’s Manual...
It is the sole responsibility of the user to ensure that the legal copyrights of the copyright owners are respected. About This Manual This TEAC CD Duplicator User’s Manual explains how to operate the TEAC CD Duplicator unit. It is divided into the following chapters: Chapter 1: Introduction This chapter describes the shipping package contents and introduces the CD Duplicator unit.
There is no need to install software. The unit can be set up very quickly. There is no need to attach any cables to your computer since the TEAC CD Duplicator functions entirely as a stand-alone unit. TEAC CDW-D11 User’s Manual...
CD Duplicator Package Contents CD Duplicator Package Contents Your TEAC CD Duplicator package includes the following items (see Figure 1). ❑ TEAC CD Duplicator unit ❑ AC power cable ❑ TEAC CD Duplicator User’s Manual (this booklet) User’s Manual AC power cable TEAC CD Duplicator unit Figure 1.
Press the Down arrow button to scroll down functions or menus. Press the ENT (Enter) button to execute a selected function. Press the ESC (Escape) button to cancel a selected function or go back to the main menu. TEAC CDW-D11 User’s Manual...
Page 12
(if the tray fails to open, you can use the emergency eject mechanism). You can close the tray by pressing the eject button. Note: TEAC strongly recommends that you do not push the tray in to close it. Please press the eject button to eject or retract the tray.
Caution: Do not attempt to bypass the grounding plug. Otherwise, you risk damage to the unit and electrical shock. Note: To ensure proper operation, use only the original AC power cable with your TEAC CD Duplicator unit. cooling fan: Ball-bearing fan cools the CD Duplicator. TEAC CDW-D11 User’s Manual...
LCD display is tested. Once the initialization is complete, the CD Duplicator is ready for use. The LCD displays the Copy function by default. Figure 5. Copy Function on LCD Panel TEAC CDW-D11 User’s Manual...
To remove the failed CD-R disc, press the eject button on the bottom drive (target drive) and retrieve the disc. Press the eject button again to retract the disc tray. You can change the default settings by using the Advanced Setup menu. TEAC CDW-D11 User’s Manual...
3 Test & Copy This function performs the test simulation and the copy process in one step. The copy process is performed only if the simulation detects no problems. If the simulation fails, the copy process is cancelled. TEAC CDW-D11 User’s Manual...
8.2 Play Audio Track This function enables the source drive as a music player. You can connect standard multimedia speakers to the audio jack of the source drive. The volume TEAC CDW-D11 User’s Manual...
On occasion, MAXIMUM, using the maximum writing speed will cause copy failure due to poor quality CD-R discs or unstable CD writing at high speed. In this case, TEAC recommends that you lower the writing speeding. 9.3 Read Speed This function will set the reading speed of the target drive.
This setting controls three writing methods: ❑ Disc At Once (DAO) ❑ Track At Once (TAO) ❑ TAO Not Close is the default setting. 9.11 Display Time This function displays the total time of each copy process. The default setting is TEAC CDW-D11 User’s Manual...
If the setting is , no messages will be displayed if an error occurs. The copy process will be completed and will include all errors found in the process. The default setting is TEAC CDW-D11 User’s Manual...
Note: The CD+G value must be set to OFF in order to use the Track Extraction features. 10.10 ISRC & MCN This function enables or disables ISRC and MCN format support. The default setting is 10.11 Switch USB Mode This function is not applicable to the TEAC 1x1 CD Duplicator. TEAC CDW-D11 User’s Manual...
All data will be lost, erase? All data on the disc will be lost. Confirm erasure of data. Erase Finished The erasing of data is complete. No Eraseable Disc in CD-RW!! The disc on the CD-RW device is not rewritable. TEAC CDW-D11 User’s Manual...
Tgt overflow, del last trk? The disc capacity is insufficient to store the selected tracks. Do you want to delete the last track? Ins empty disc Continue? Do you want to insert a blank disc and continue copy- ing? TEAC CDW-D11 User’s Manual...
Remove the disc from the disc tray and place it in its protective case. Then press the Eject button again to retract the disc tray back into the drive. TEAC CDW-D11 User’s Manual...
Audio Editing Appendix D. Specifications The following table lists the product specifications for the TEAC CD Duplicator. Model CDW-D11 CD Recorder TEAC 52x32x52 CD-RW Drive Interface IDE / ATAPI Read Speed Write Speed CD-R: 52x CD-RW: 32x Drive Buffer Size...
Please contact us at the addresses listed at the end of this warranty statement. WHAT TEAC WILL PAY FOR – We will pay all labor and material expenses for items covered by the warranty. Payment of shipping charges is discussed in the next section of this warranty.
Page 30
EXCLUSION OF DAMAGES TEAC’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, AT TEAC’S OPTION. TEAC SHALL NOT BE LIABLE FOR DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, INTERRUPTED OPERATION OR COMMERCIAL LOSS, LOST PROFITS OR ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR OTHERWISE.