Table of Contents
Advertisement
Documentation:
Check
Safety Precautions
Read the following before installing or operating the
Power Distribution Unit (PDU):
1. Use only the supplied hardware to attach the mounting brackets.
2. The PDU must only be plugged into a three-wire, grounded outlet
on a circuit protected by a fuse or circuit breaker. Connection to
any other type of power outlet may result in a shock hazard.
3. Do not use extension cords or adapters with this PDU.
4. Never install a PDU or associated wiring or equipment during a
lightning storm.
5. Check that the power cord, plug, and socket are in good condition.
6. The socket-outlet shall be installed near the equipment and shall
be easily accessible.
7. CAUTION! To prevent the risk of fire or electric shock, this PDU
should be installed in a temperature and humidity controlled
indoor area free of conductive contaminants. Do not install this
PDU where excessive moisture or heat is present.
Installation
Horizontal Installation (1U models only)
Step 1 – Mounting bracket installation
Install the screws (M4 X 8) in holes diagonally from each other.
Step 2 – PDU Mounting
Install the PDU using fasteners compatible with the rack.
2
U s e
r M a
n u a l
P o w
D is tr
e r
ib u ti
o n
U n it
User Manual
Before using, please check to ensure the package contains all
the items shown above. If there are any missing parts, please
contact CyberPower technical support at www.CPSww.com
For more information on CyberPower products, visit www.CPSww.com
Advertisement
Table of Contents
