Control Panel - Panasonic SC-HTR310 Operating Instructions Manual

Control guide

Control panel

Standby/on switch
( pages 22 to 24)
Display
DIGITAL
DTS
VS
SFC
Amplifi er
AC inlet (
page 22)
Exhaust hole (Cooling fan)
Speaker terminals
The speakers are already connected. Do not touch the connectors unless absolutely necessary.
If the connectors become disconnected, refer to the illustrations below for connection.
Connector connection
Green
Purple
Purple
Green
8
RQTX0151
Standby indicator
( page 22)
General display
: Dolby Digital sources
: DTS sources
: When Dolby Virtual Speaker is working
: When you are using an SFC mode
Speaker terminals
Red
White
White
Red
For adjusting volume (
For using "WHISPER MODE SURROUND"
(
When input signal is fi xed to PCM (
When input signal is digital
PCM
DIGITAL INPUT
DIGITAL DTS
VS
PL
Digital surround signal/Sound fi eld (
Digital input terminal (
Audio input terminal
( pages 16, 17, 19 and 21)
How to attach the connectors
Terminal block
Connector
page 24)
VOLUME
WHISPER MODE INPUT
SURROUND SELECTOR
"SELECTOR" switch
(
page 29)
page 33)
When input signal is fi xed to
DTS ( page 33)
SFC
below, pages 26 and 27)
When Dolby Pro Logic
used
(When using Dolby Virtual Speaker on
2 channel stereo source)
pages 17 to 21 and 28)
HDMI terminal (
pages 17 and 28)
Make sure the colour on the connector
indicates the same as corresponding
terminal and insert the connector straight all
the way.
page 24)
decoder is being