Functions and settings
Switching between
dual sounds
You can switch
between dual sounds of
Dolby Digital signals.
Clear audio at low
volume
Dynamic range
compression for Dolby
Digital
It compresses the
dynamic range so
that you can still hear
dialogue and leave the
sound fi eld unaffected.
Use this function when
you have to turn the
volume down, such as
late at night.
Switching the
attenuator
Switch the attenuator
"ON " when big sounds
become distorted while
playing an analogue
input source.
32
RQTX0151
Press and hold
1
2
Press
to select
"DUAL PRG".
REAL C., BASS, TREBLE, BALANCE, HDMI,
TV DELAY, DUAL PRG, DRCOMP, ATTENUATOR,
REMOTE, INPUT MODE, RESET, EXIT
Only appears when audio adjustment can be made.
3 Press
to select the sound.
M1: Main audio, M2: Sub channel audio output,
M1+M2: Main + Sub channel audio output
4 Press
a few times to select
"EXIT".
Return to previous menu/cancel.
1
Press and hold
2
Press
to select "DRCOMP".
REAL C., BASS, TREBLE, BALANCE, HDMI, TV DELAY,
DUAL PRG, DRCOMP, ATTENUATOR, REMOTE, INPUT MODE,
RESET, EXIT
Only appears when audio adjustment can be made.
3 Press
to select setting.
OFF: Normal playback; STANDARD: The level
recommended by the producer of the software for
household viewing; MAX: The maximum allowable
compression (recommended for night viewing)
4 Press
a few times to select
"EXIT".
Return to previous menu/cancel.
1 Press and hold
2 Press
to select
"ATTENUATOR".
REAL C., BASS, TREBLE, BALANCE, HDMI, TV DELAY,
DUAL PRG, DRCOMP, ATTENUATOR, REMOTE, INPUT MODE,
RESET, EXIT
Only appears when audio adjustment can be made.
3 Press
to select "ON".
4 Press
a few times to select
"EXIT".
Return to previous menu/cancel.
for about 2 seconds.
Press
for about 2 seconds.
Press
for about 2 seconds.
ON, OFF
Press
Press
to
confirm.
Select "EXIT" and confi rm
•
to fi nish the setup mode.
Press
to
confirm.
Press
to
confirm.
Select "EXIT" and confi rm
•
to fi nish the setup mode.
Press
to
confirm.
Factory setting: OFF
Press
to
confirm.
Press
to
confirm.
Select "EXIT" and confi rm
•
to fi nish the setup mode.
Press
to
confirm.
Factory setting: OFF
Press
to
confirm.