Panasonic SC-HTR310 Operating Instructions Manual page 13

Home theater audio system
Hide thumbs Also See for SC-HTR310:
Table of Contents

Advertisement

Installing a DVD player/Blu-ray Disc player/DVD recorder or other equipment on
the shelf
(Please also refer to the other equipment's operating instructions.)
1
Press the cut-out on the back panel using
your thumb etc. with force to remove it for
wiring after installing the equipment.
Refer to pages 16 to 21 for connections with other
equipment.
If the operating instructions of the equipment require heat
release or ventilation, remove the cut-out on the back
panel to secure ventilation.
When setting equipment with the exhaust hole on the side,
follow the operating instruction of the equipment before
setting.
2
Pull out the bundled cords of stored
equipment from the cut-outs for
connection.
Note
Do not put equipment weighing more than 12 kg on
the upper shelf or more than 20 kg on the lower shelf.
Image interference may occur if you put a DVD
recorder, etc. on the upper shelf. Put it on the lower
shelf if this occurs.
Depending on the equipment to install, the cables
may not be connected.
To install the equipment, adjust the height of the shelf
to the position where the cables come out.
If you set on the lowest level (on the fl oor panel), the
equipment with long depth may not be set properly or
the equipment cord may not be taken out.
When installing equipment, refer to the table for "Shelf
assembly" on page 12.
Installing the television
Recommended:
SC-HTR310
SC-HTR210
Place the television (with stand attached)
in the center of the rack.
Note
Lift the television when placing it on the rack. Dragging it may
damage the top panel.
(For details, refer to the television's operating instructions.)
If the television stand adheres to the glass top panel too tight to
remove, lift the stand inserting a fl at and thin object. This may help
removing the stand.
Install the rotary television stand not to run over the rack even if it
rotates.
(Front view)
Shelf top (dimension
Shelf top (dimension
The lowest level (on the fl oor panel) (dimension
(Please also refer to the television's operating instructions.)
: 50 inches or less
: 42 inches or less
(Rear view)
Cut-outs
Shelf top
The lowest level (on the fl oor panel)
): 348 mm (Maximum depth of equipment when
A
the big cut-outs part on the back panel is
opened)
): 255 mm (Maximum depth of equipment when
A
the small cut-outs part on the back panel is
opened)
255 mm (Maximum depth of equipment)
Push the black-circled
point.
Small cut-outs
Big cut-outs
(Side view in cross section)
):
B
Television
stand
13
RQTX0151

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-htr210

Table of Contents