Table of Contents
Advertisement
Navi Bars
Access folder
Receiver lock
To open this menu, you will be asked to enter your access code.
The access code is set to 1234 at the factory.
If you select "Yes", you will have to enter the access code every time
you start the Mediamaster from standby.
Age rating control
If you want everybody to have access to all available types of
programmes, select "No".
If you select "Yes", you may block programmes unsuitable for
children.
Age Limit
Select an age limit between 3 and 18 years on the line that appears.
NOTE: you should be aware that not all service providers have the
necessary codes for these functions implemented in their
transmissions.
Change access code
You can change the access code from the standard factory
setting of 1234.
NOTE: do not forget your access code as without it, you will
not have access to any of the functions that require the code.
If you should forget it, please contact Nokia Support for help.
Maintenance folder
System Information
When you enter the Maintenance folder, you will find general
information about which hardware and software version your
Mediamaster is running on.
Reinstall
Only use this option if you have to start the complete installation
procedure from scratch. If you continue from here, all your previous
settings, access code and favourite channels, etc. will be erased.
If you do not want to reinstall, you can leave this menu when
the warning is displayed by pressing "back".
SW update
Your Mediamaster will advise you from time to time of any new
software upgrades using information sent by TV broadcasters
through your aerial.
GB 20
Advertisement
Table of Contents
