Remote Control - Nokia Mediamaster 120 C User Manual

Mediamaster
Table of Contents

Advertisement

Remote control

This section describes how to operate the Mediamaster using the buttons on the remote control.
mute
Press once to turn the sound off/on (mute/unmute).
Press and hold for a few seconds to switch the
Mediamaster into standby mode. In addition,
press this button to switch the Mediamaster on.
ok
To confirm a selection.
To open Navi Bars
cursor up
Move up in the menus and change to the next channel in
viewing mode.
cursor down
Move down in the menus and change to the previous
channel in viewing mode.
cursor left
Move left/change settings in menus.
Decrease the volume level in viewing mode.
cursor right
Move right/change settings in menus.
Increase the volume level in viewing mode.
opt
To display temporary settings (options) while watching TV.
Activate Channel Filtering & Sorting in Navi Bars mode.
info
Three different functions:
Pressing once will show current programme name.
Pressing twice will show information about the current
and next programme.
Pressing three times will give the 7-day programme guide
(EPG).
back
To go back one level at a time within menus.
To close the Navi Bars.
Toggle between the present and previous channel.
0 - 9
To change the channel and to select individual menu
options.
NOTE: If 0 is entered as the first digit, the TV Release
functionality is activated (see below).
0
To toggle between the Mediamaster reception or any
other reception to your TV (depending of TV model.)
navi
To open and close the Navi Bars.
txt
Press to enter Teletext (if available).
tv/radio
Toggle between TV and radio mode.
GB 4

Advertisement

Table of Contents
loading

Table of Contents