Nokia 120C User Manual

Mediamaster.
Hide thumbs

Advertising

User Guide

   Related Manuals for Nokia 120C

   Summary of Contents for Nokia 120C

  • Page 1

    User Guide...

  • Page 3: Table Of Contents

    • Do not allow the unit to be exposed to hot, cold or humid conditions. • Service should only be carried out at a Nokia Authorised Service Centre. • Please note that the only way to isolate the Mediamaster completely from...

  • Page 4: Remote Control

    Remote control This section describes how to operate the Mediamaster using the buttons on the remote control. mute Press once to turn the sound off/on (mute/unmute). Press and hold for a few seconds to switch the Mediamaster into standby mode. In addition, press this button to switch the Mediamaster on.

  • Page 5: Front And Rear Panel, Preparing The Remote Control

    Connecting the Mediamaster Front and Rear panel antenna cable for connection of the antenna cable Slot to the cable TV antenna socket Reset button for a Conax smart card TV SCART socket * * for connection to the TV SCART DC in TV/VCR Digital audio...

  • Page 6: Connecting The Mediamaster

    In this section, you will see some of the most common ways to connect your equipment. If you have problems with your connections and need help, contact your retailer or Nokia Support. Connecting to the TV with SCART • Connect an antenna cable from the cable TV antenna socket in the wall to the antenna cable input on the Mediamaster.

  • Page 7

    Connecting the Mediamaster Connecting a Video recorder with SCART • Connect an antenna cable from the cable TV antenna socket in the wall to the antenna cable input on the Mediamaster. • Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Video.

  • Page 8

    Connecting the Mediamaster & First-time installation About Smart card The Mediamaster is equipped with a built-in decoder for the Conax encryption system. Insert a valid smart card fully into the slot on the back of the Mediamaster. The gold chip must face downwards and inwards. Connecting a Hi-fi system It is possible to connect a TOS link cable from the Digital audio out- put on the Mediamaster to a Hi-fi system that is equipped with the...

  • Page 9

    First-time installation Switching on for the first time and start • Plug in your Mediamaster and the "First-time installation" menu is shown. • Press ok to continue. Select the desired menu language using the buttons. This will become the main language for menus, audio and subtitling. The menu to the right will be shown as long as the Mediamaster is searching for TV and radio channels.

  • Page 10: Programme Information

    Watching TV & listening to the radio General information You can watch digital TV and listen to digital radio with this Mediamaster. • If no TV channel is automatically shown after you have finished the installation procedure, press any of the number buttons, or step up and down with cursor up/down to select a channel.

  • Page 11: Temporary Settings, Programme Guide: Epg

    Watching TV & listening to the radio Temporary settings By pressing opt, a menu appears that allows you to configure temporary settings for the channel you are currently watching. If you leave the channel and return to it later, your temporary settings will be deleted.

  • Page 12: External Equipment, Sorting Channels

    Watching TV & listening to the radio External equipment With the 0 (zero) button, you can toggle between externally con- nected equipment, e.g., a VCR (the VCR must be switched on.) This function may not be available on all TV and video models. NOTE: This is also only valid when the units are connected via SCART cables, not if they are connected by RF connection.

  • Page 13: Teletext

    Watching TV & listening to the radio Teletext Pressing txt will open a teletext page, if teletext is transmitted for that channel. Select teletext pages using the number buttons on the remote control (Fig. 1). You can also quickly move to the different page options shown on any page by pressing cursor left/right.

  • Page 14: Navi Bars, Navigating With Navi Bars, The Settings Folder

    Navi Bars Navigating with Navi Bars Navi Bars are used for selecting TV/Radio channels and to enter Navi Bars menus in which you can perform different settings. Bookmark Bookmark 1. Display Navi Bars by pressing the navi or ok button; to hide them, name press the back button.

  • Page 15: The User Folder, The Conax Ca Folder

    Navi Bars The User folder Banner time out When you switch channels, an information banner will be shown for a few seconds. You can select the duration for which the banner will be shown. Volume bar time-out Select the duration for which the volume bar will be visible on the screen.

  • Page 16: The Tv Folder

    Navi Bars The TV folder Time adjustment The time is adjusted by using the buttons, ±1/2 an hour at a time. TV screen format Select your TV screen format. The 4:3 format is standard for most TV screens. Select 16:9 for widescreen TV. Press opt to get a TV programme in the background from which you can instantly watch the result of your choice.

  • Page 17: Edit Lists Folder

    Navi Bars Edit lists folder The TV folder may contain a lot of channels. By creating your own lists you can make it easier to handle channels. You can create and edit favourite channel lists in these menus. Select list If you have several lists and want to make changes in them, select which list by using the buttons.

  • Page 18

    Navi Bars Delete selected list If you want to completely delete a list, first select the list with buttons on the line "Select list". Then, move down to "Delete selected list" and press ok. Rename selected list Give the list a new name. Refer to "Create list" on the previous page. Add/Delete channels From this menu, you add and remove the channels in your lists.

  • Page 19: Search Folder

    Navi Bars Search folder When you want to search for channels at a later time. A channel search procedure can be performed in different ways: Automatic, Manual or Advanced manual search. Automatic search Highlight the line and press ok to start searching for channels Manual search Frequency: Enter the frequency with the numeric buttons on the remote control.

  • Page 20: Access Folder, Maintenance Folder

    1234. NOTE: do not forget your access code as without it, you will not have access to any of the functions that require the code. If you should forget it, please contact Nokia Support for help. Maintenance folder System Information...

  • Page 21: Channel Info, Games

    Navi Bars This will appear as a message on your TV screen asking you to press ok to start the download. You are strongly advised to accept the download as this might enable you to receive new features and/or services that may be available to you. You can choose to postpone the download for a more convenient time by pressing the back button.

  • Page 22: Technical Specifications

    Technical specifications Transmission standards DVB-C DIGITAL AUDIO (S/PDIF) Connector 1 x RCA Tuner input & Demodulator AUDIO Input connector 1 x IEC 169-2 (female) Optical TOS-link connector For PCM, DTS and Dolby Digital RF input frequency 110-872 MHz Bitstream audio output signals Input impedance 75 Ohm...

  • Page 23: Nokia Mediamaster Software End-user License

    This Software Agreement ("Agreement") is between You (either an individual or an entity), the End User, and Nokia Corporation Multimedia ("Nokia"). The Agreement authorizes You to use the Software specified in Clause 1 below and which is included in this Nokia digital TV receiver. This is an agreement on end-user rights and not an agreement concerning sale.

  • Page 24

    Nokia is a registered trademark of Nokia Corporation www.nokia.com 00033264.00...

Comments to this Manuals

Symbols: 0
Latest comments: