Clearing Jams - Central Pneumatic 92917 Assembly And Operating Instructions Manual

Anytime any maintenance or repairs are done (including clearing jams),
1. Disconnect the Nailer from the air hose.
Empty the Nail Canister (90) completely.
2.
3. Attempt to fire the Nailer into a piece of scrap wood to ensure that it is
disconnected and is incapable of firing any nails.
Always leave the Nail Canister (90) open during maintenance. The Canister
4.
is spring-loaded and may cause parts or a nail to fly out of the Nailer.
1. Occasionally a nail may become jammed in the firing mechanism of the Roofing
Nailer, making the tool inoperable.
2. To remove a jammed nail, disconnect the Roofing Nailer from its compressed air
supply. Empty the Nail Canister (90) completely of nails. Attempt to fire the Roof-
ing Nailer into a piece of scrap wood to ensure it is disconnected and is incapable
of firing any nails. Always leave the Canister open during this procedure. The Nail
Canister is spring loaded and may cause parts or a nail to fly out of the Roofing
Nailer.
3. Use a pair of needle nose pliers (not included) to remove the jammed nail (usually
from the Feed Pawl (51) area). Replace the coil of nails into the Roofing Nailer.
Close the Canister Cover (84) and Door (53) securely. Then, reconnect the air
supply hose to the tool.
SKU 92917 & 93253
FIRST:

Clearing jams

For technical questions, please call 1-800-444-3353.
Page 11