Inspection, Maintenance, And Cleaning; Please Read The Following Carefully - Central Pneumatic 92917 Assembly And Operating Instructions Manual

Coil roofing nailer 3/4” to 1-3/4” fastener length capacity

Hide thumbs Also See for 92917:

Set up and operating instructions manual (21 pages)

Set up and operating instructions manual (21 pages)

Table Of Contents

Table of Contents

Anytime any maintenance or repairs are done, FIRST:

Disconnect the Nailer from the air hose.

Empty the Nail Canister (90) completely.

Attempt to fire the Nailer into a piece of scrap wood to ensure that it is

disconnected and is incapable of firing any nails.

Always leave the Nail Canister (90) open during maintenance. The Canister

is spring-loaded and may cause parts or a nail to fly out of the Nailer.

Inspect the Nailer frequently and lubricate periodically with Pneumatic tool oil, then

wipe dry. Do not use detergent oil or additives as these lubricants will cause ac-

celerated wear to the internal seals.

Inspect the air supply filter, if present, before each use and clean or replace as

necessary. Dirt and water in the air supply filter are major causes of pneumatic tool

wear. Use a filter/oiler for better performance and longer tool life. The filter must

have adequate flow capacity for the specific application.

Store the unit in a clean and dry location.

All maintenance, service, or repairs not listed in this manual are only to be

attempted by a qualified technician.

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN

THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY

REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY

REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION

OF REPLACEMENT PARTS THERETO.

SKU 92917 & 93253