Table of Contents
Advertisement
LSQT1021(ENG).book 115 ページ ２００６年２月２日 木曜日 午後３時１０分
With a VCR
Dubbing images onto other video devices
You can dub images played back on this unit onto other video devices.
You can create a playlist by gathering the scenes you want to dub, then dub the scenes in this
playlist only to other devices. (l 93)
≥ Use the AC adaptor to free you from worrying about the battery running down.
1 Connect this unit and a video
device.
A AV/S cable (supplied)
≥ Insert the plugs as far as they will go.
≥ If your recorder is not equipped with AV
Input Sockets, the 21-pin Adaptor B
(purchase separately) is necessary.
Consult your dealer.
* If the video device has an S Video terminal,
also connect the S Video plug into it. This
allows you to enjoy more beautiful pictures.
2 Turn on this unit, then rotate the mode dial to select
3 Change the input channel on the video device and TV.
≥ The channel set will differ depending on the terminal to which the unit is connected.
4 Start playback on this unit.
Then start recording on the connected device.
≥ See the operating instructions of the video device for details.
To stop dubbing
Stop recording on the connected device.
Then stop playback on this unit.
≥ If the date and time display and function indication
are unnecessary, cancel them before dubbing.
(l 48, 112)
With a VCR
(RAM) (-RW‹VR›) (-RW‹V›) (-R)
A
*
S VIDEO IN
VIDEO IN
AUDIO IN
B
.
115
LSQT1021
Advertisement
Table of Contents
