Tv System; Clock Settings - Panasonic SC-HT1500 Operating Instructions Manual

Changing the unit's settings
Refer to the control reference on page 48.

TV System

Change the settings to match the equipment you are connecting
with, or to match the title when there are both PAL and NTSC titles
on the HDD.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "SETUP"
and press [ENTER].
3
Press [3, 4] to select "Connection"
and press [1].
4
Press [3, 4] to select "TV System"
and press [ENTER].
5
Press [3, 4] to select the TV system
and press [ENTER].
SETUP
Tuning
Others
Disc
Picture
Sound
SELECT
Display
ENTER
Connection
RETURN
≥PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as PAL
60.
–Select to record television programmes and PAL input from
other equipment.
–[HDD] Select when playing a PAL input title recorded on the
HDD.
≥NTSC
–Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
–[HDD] Select when playing a NTSC input title recorded on
the HDD.
6
Press [2, 1] to select "Yes" and
press [ENTER].
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
∫ To change the setting all at once (PAL
While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the
main unit for 5 or more seconds.
RQT7621
52
TV System
PAL
NTSC
!#

Clock settings

Usually, the unit's Preset Download or Auto-Setup function
( page 15, 16) automatically adjusts the clock to correct time.
Under some reception conditions, however, the unit cannot set the
clock automatically.
In this case, follow the operation steps below to manually set the clock.
≥In the case of a power failure, the clock setting remains in memory
for approximately 60 minutes.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select "SETUP"
and press [ENTER].
3
Press [3, 4] to select "Others" and
press [1].
4
Press [3, 4] to select "Clock" and
press [ENTER].
Auto Clock Setting
If a TV station transmits a time setting signal, and when "Automatic" in the
Clock setting menu is set to "On", the automatic time correction function
checks the time and if necessary it is adjusted several times every day.
5
Press [3, 4] to select "On" of
"Automatic" and press [ENTER].
Auto clock setting starts.
The following screen appears when setting is complete.
CHANGE
ENTER
RETURN
To stop partway
Press [RETURN].
Manual Clock Setting
5
Press [3, 4] to select "Off" of
"Automatic" and press [ENTER].
No.
0 9
CHANGE
SELECT
NTSC)
ENTER
RETURN
6
Press [2, 1] to select the item you
want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-------------------------------------------------------------------------------------------J
7
Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
8
Press [ENTER] when you have
finished the settings.
The clock starts.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
Clock
Automatic On
Time Date
15 : 45 : 39 1 . 8 . 2004
Automatic clock setting completed.
ENTER: access RETURN: leave
Clock
Automatic Off
Time Date
15 : 45 : 39 1 . 8 . 2004
Please set clock manually.
ENTER: store RETURN: leave