Assembly - Panasonic SC-HT1500 Operating Instructions Manual

1
STEP Front and surround speaker assembly
Supplied Accessories
Make sure you have all the
indicated components before
assembly, setup, and
connection.
Preparation
≥To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥For assembly, use a Phillips-head screwdriver.
1
Attach the pipe to the large base.
1 Thread the speaker cable through the base.
≥For quicker threading, fold the cable lightly in half (do not
crease), pass the folded portion through the hole in the base,
and then pull through the rest of the cable.
Groove
2 Insert the pipe.
Insert the pipe while gently pulling on the speaker cable.
Lessen excess
speaker cable.
1
2
Attach the stands to the front and surround speakers.
≥There is no difference between the right and left speakers and stands.
≥Using the polyfoam and packaging cover included with this unit may ease attachment.
1 Remove the mounting plate screw, and remove plate B.
Speaker
Packaging
cover
RQT7621
6
∏ Front speaker units
Cable Thread the speaker
cable through here.
Hole for screw
2
Mounting plate screw
1
3
2
Plate B
∏ Surround speaker units ∏ Pipes
3 Secure the pipe to the base.
Ensure the screw is securely fastened.
Rear side of base
The supplied stands are specially designed for
attachment to Panasonic SB-FS1501 front speakers
and SB-PS1501 surround speakers.
Only use as indicated in this setup.
2 Place the pipe on plate A and attach plate B.
Rotate the pipe so that the flat side is facing away from the back
of the speaker.
Polyfoam
3 Secure the plate with the same screw removed in
procedure 1.
∏ Large bases ∏ Washer screws
Cable
Washer screw
Plate B
[Note[
The stands with
Plate A
longer cables are
for the surround
speakers.
Fit the offset into the slot
and slide plate B into the locked position.
Plate B
Offset
Slot
Align the surface of plate B so that it
is even with the pipe surface.
Plate B
Pipe
Plate A