Cleaning Agitator; Replacing Agitator - Panasonic MC-UG581 Operating Instructions Manual

Card
Carte
Tarjeta

Cleaning Agitator

Replacing Agitator

- 30 -
Clean agitator after every five uses
and every time the belt is replaced.
Remove lower plate.
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors.
Remove agitator.
Remove any string or debris located
on the end caps.
Reinstall agitator and lower plate.
When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
Remove lower plate and agitator.
Clean debris from end caps.
Position belt over belt pulley on the
new agitator.
Reinstall agitator and lower plate.