Replacing Belt - Panasonic MC-UG581 Operating Instructions Manual

Lift Agitator Up
Soulever l'agitateur
Inidad del agitador
+
Motor Shaft
Arbre
d'entraînement
du moteur
Eje del motor
+
Groove
Ouverture
Ranura

Replacing Belt

+
Install New Belt
Poser la nouvelle
courroie
Instalaciòn de la
correa
End Cap
Bouchon
Tapa del extremo
Remove lower plate.
Remove agitator by carefully lifting
out.
Remove worn or broken belt.
Loop new belt (Panasonic Type UB8
only) around motor shaft and belt
pulley; see illustration for correct belt
routing.
Reinstall agitator back into nozzle
housing grooves.
After reinstalling the agitator, turn it
by hand to make sure that belt is not
twisted or pinched and that all
rotating parts turn freely.
Reinstall lower plate.
- 28 -