Wolf 762 Installation Instructions Manual page 5

I N S TA L L AT I O N I N S T R U C T I O N S
V E N T I L AT I O N O P T I O N S
IMPORTANT NOTE: It is recommended that
you operate the Wolf dual fuel range with a
Pro ventilation hood. Contact your Wolf dealer
for details.
Pro Wall Hood – 22" (559), 24" (610) or 27"
(686) depths and 30" (762) to 66" (1676)
widths in classic stainless steel.
Pro Island Hood – 36" (914) to 66" (1676)
widths in classic stainless steel.
Pro Hood Liner – available in widths to
accommodate 30" (762) to 60" (1524) hood
shells.
All Pro ventilation hoods have welded seams,
sealed halogen lighting and removable, dish-
washer-safe stainless steel filters.
Blower requirements may vary due to length
of duct work and number of angles. The basic
recommendation is 1 CFM per 100 Btu/hr.
Always consult your HVAC professional for
more concise blower requirements.
IMPORTANT NOTE: When installing a ventila-
tion hood, refer to the specific requirements
of the hood for the minimum dimension to
countertop.
Dimensions in parentheses are in
millimeters unless otherwise specified.
I N S TA L L AT I O N S P E C I F I C A T I O N S
Wolf dual fuel ranges come in 30" (762), 36"
(914), 48" (1219) and 60" (1524) widths.
Illustrations on pages 7–10 provide the overall
dimensions and installation specifications for
each width of dual fuel range.
Each range is designed to fit between cabinets
set at the distance specified by the unit. For
example, a 36" (914) range will fit a 36"
opening. The exception is the 60" (1524) unit
1
which will require a 60 / " (1530) opening.
4
IMPORTANT NOTE: Cabinet opening dimen-
sions shown in the Installation Specifications
illustrations must be used. These dimensions
provide for required clearances.
Each unit is designed with a terminal block on
the rear of the range. The terminal block will
also accept an appliance power cord. Have a
qualified electrician or installer wire your unit
from the electrical supply, through the
knockout in the unit base and to the terminal
block on the range.
IMPORTANT NOTE: Locate the electrical
supply within dimensions shown in the
Installation Specifications illustrations and
flush with back wall.
Refer to the Installation Specifications illustra-
tion for your model on pages 7–10 for the
exact rough opening dimensions and location
of the gas supply and electrical.
Wolf dual fuel ranges using natural gas will
operate up to an altitude of 8,000' (2438 m)
without any adjustment. Natural gas and LP
gas installations from 8,000' (2438 m) to
11,000' (3353 m) need the high altitude conver-
sion kit. Contact your Wolf dealer for details.
5