Table of Contents
Advertisement
5.3.3 Parental Control
In this menu, you can set Channel Lock status (ON or OFF), the Menu Lock status, Parental Setting and
change the PIN Code.
The default PIN code is 0000.
5.3.3.1 Channel Lock
Set the system Channel Lock to ON or OFF. If the channel lock is ON, the parental PIN code has to be
entered correctly before watching the locked channel.
5.3.3.2 Menu Lock
Press YES or NO, whether you want to lock the Menu or not and press OK to confirm. If the menu lock is
on, you need to enter your PIN for operations such as search program and set factory default.
5.3.3.3 Parental Setting
Set some programs to lock status. If a program is locked, the parental PIN code has to be entered
correctly before watching the locked program. Use UP/DOWN keys to select the channel you want to
lock and press OK to confirm.
5.3.3.4 Change PIN
PIN is Personal Identification Number. To modify the password, you need to enter the current PIN,
a new 4 digit password and once again the new one for confirmation; the system password will be
changed then.
5.3.4 System Information.
Displays the software version information. Press OK/EXIT keys to return.
5.3.5 Update through PC to STB
1. Connect Computer to receiver (receiver must be power off) with a 9-pin cross cable
(two females)
2. Download the specially STBload tool for SRT 5220 from www.strong.tv website.
3. Read the instructions how to load new software it to your receiver.
NOTE: INCORRECT OPERATION MAY CAUSE UNREPAIRABLE DAMAGE TO THE RECEIVER.
1. Do NEVER use HyperTerminal to download software.
2. DO NOT POWER OFF THE RECEIVER DURING THE PROCESS OF DOWNLOADING. Wait
until "Burn OK" is shown.
3. DO NOT PLUG IN OR UNPLUG THE RS232 INTERFACE WHEN RECEIVER IS
POWERED ON.
12
PART 1 • English
Advertisement
Table of Contents
