Table of Contents
Advertisement
PART 1 • English
5.3.1.3 Country
Press OK/RIGHT to select your country, press OK to confirm. If your country is not in the list, select
Other. It will apply the most common frequency plan for European countries.
5.3.1.4 Channel Numbering
Here you can set the channel list by different number format: Appearing order or Operator defined.
5.3.1.5 Antenna Power
Press OK/RIGHT to select turn OFF or ON the antenna power, press OK to confirm. Before setting
the Antenna Power to ON: make sure your antenna is ACTIVE, requires power 5 V DC and it's power
consumption is not more then 100 mA.
5.3.1.6 Time Settings
If a broadcaster provides GMT, you can set the time using GMT, or set time by yourself.
If the GMT usage is ON then the Current time is set automatically or you can set the time
n
zone. If your broadcaster provides the correct time offset then your receiver will change from
summertime to wintertime automatically.
If you set GMT Usage to OFF, Set Date and Set Time item are displayed. To set the time value
n
manually, move the cursor to the time item and use the numeric buttons on the remote control.
5.3.1.7 Factory Default
Select Factory default and press OK. Select YES and for the warning "Do you want to set factory default?"
press OK, then the receiver will return to its factory default state, and all user data will be deleted.
5.3.2 Personal Style
In this menu, you can set the Menu Colour, Transparency Level, Border Pattern.
Press UP/DOWN to select the item, and Press LEFT/RIGHT to set the value and OK to confirm.
11
Advertisement
Table of Contents
