Overlay Panel; Overlay Panel Dimensions - Sub-Zero 249RP Planning Information

Planning Information
Undercounter Model 249RP

OVERLAY PANEL

Rear View
1 5
/ " / "
8 (3) 16
(8)
1"
(25)
Notch
Required
for Hinge
Clearance
(top and bottom)
Notch required for hinge clearance
H
W
Overlay Door Panel
Dimensions in parentheses are in
millimeters unless otherwise specified.
O V E R L A Y P A N E L
The overlay door panel design allows for a decorative
panel to cover the door trim for a more seamless appear-
ance. To achieve this look, the most common way is to
work with three panels – the decorative
overlay panel, a 0.10" (3) thick spacer panel and a
thick backer panel. An accessory kit (OVERPAN) is required
in order to accommodate the proper installation of the
overlay panel. Additional specifications will be provided
with the accessory kit.
IMPORTANT NOTE: An area must be notched out on the
back edge of the overlay panel at both the top and bottom
hinges to avoid interference as shown in illustration on
this page.
Keep in mind that the Sub-Zero door panels have the
potential for hitting adjacent cabinets and / or countertops
when they are opened. You need to be aware of your
surrounding cabinetry and space limitations when using
the overlay units. Refer to the full-scale illustration on
page 7.
You will need to follow the exact dimensions and panel
placement for your model to ensure a proper fit. Refer to
the overlay panel specifications below.
IMPORTANT NOTE: The weight of the panel assembly
cannot exceed 20 lbs (9 kg).
IMPORTANT NOTE: The total thickness of all panels for an
overlay model must be at least
O V E R L A Y P A N E L D I M E N S I O N S
Door Panel
Door Spacer
Door Backer
Maximum Weight (panel assembly)
3
/ " (19) thick
4
1
/ " (6)
4
5
/ " (16) thick.
8
WIDTH HEIGHT
5
24" (610) 30 / " (770)
16
3
23" 29 / "
(584) (746)
8
5
23 / " 30"
(600) (762)
8
20 lbs (9 kg)
6