Sub-Zero 650 Specifications
Built-in model over-and-under refrigerator / freezer
Hide thumbs
Also See for Sub-Zero 650:
- Design manual (80 pages) ,
- Use & care information manual (40 pages) ,
- Use & care manual (40 pages)
Table of Contents
Advertisement
Planning Information
Built-In Model 650
Over-and-Under Refrigerator / Freezer
Front venting allows
unit to be completely
built in
Lighted electronic
control panel
Adjustable spill-proof
glass shelves
Adjustable roll-out
utility basket
Model 650/F
Framed
Egg container
High humidity
crisper drawer
Automatic ice maker
Model 650/O
Overlay
Two-tier wire
storage baskets
Removable kickplate
Model 650/S (P/B)
Stainless Steel
The Sub-Zero Model 650 over-and-under
refrigerator / freezer is available in your
choice of the framed, overlay or stainless
steel design application. Three stainless
steel finishes are offered—classic (/S),
platinum (/P) and carbon (/B).
Dimensions in parentheses are in
millimeters unless otherwise specified.
11/06
(Stainless steel design shown)
With the installation of a harness kit, these
appliances are Star-K compliant to meet strict
religious regulations in conjunction with specific
instructions found on star-k.org. You may purchase
this harness kit through your Sub-Zero dealer.
To obtain local dealer information, visit the Locator
section of our website, subzero.com.
O
ne of the most popular units within the inventory
of Sub-Zero, the Model 650 offers you large refriger-
ated storage, plus the convenience of a handy freezer
drawer with an automatic ice maker. Consider the fact
that you go into your refrigerator many times more than
your freezer and this unit makes all the sense in the
world.
Hermetically sealed
refrigeration units
Serial and model
number plate
Adjustable dairy
compartment
Adjustable door
shelves
Four-sided
magnetic gaskets
Door closers
Full-extension roll-out
freezer drawer
1
Advertisement
Table of Contents
Related Manuals for Sub-Zero Sub-Zero 650
Summary of Contents for Sub-Zero Sub-Zero 650
- Page 1 Consider the fact that you go into your refrigerator many times more than your freezer and this unit makes all the sense in the world.
-
Page 2: Features
Dimensions in parentheses are in millimeters unless otherwise specified. Full-extension freezer drawer Door alarm will let you know with an audible beeping if your refrigerator door or freezer drawer are left ajar Automatic ice maker provides an ample supply of crescent-shaped ice... -
Page 3: Specifications
Dimensions in parentheses are in millimeters unless otherwise specified. S P E C I F I C A T I O N S Model 650 Over-and-Under Refrigerator / Freezer Overall Width Overall Height Overall Depth Refrigerator Capacity... -
Page 4: Dimensions
Planning Information Built-In Model 650 I N S T A L L A T I O N S P E C I F I C A T I O N S D I M E N S I O N S Finished Rough Opening Width Finished Rough Opening Height Finished Rough Opening Depth... - Page 5 Planning Information Built-In Model 650 I N S T A L L A T I O N N O T E S Refer to the illustrations and specifications for overall dimensions, finished rough opening dimensions and installation specifics. Allow the door to open a minimum of 90˚ or you'll have problems removing drawers.
- Page 6 Planning Information Built-In Model 650 F R A M E D P A N E L S " PANELS (6) THICK OR LESS Trim reveal " " Panel Framed door panel " (6) thick or less PANELS THICKER THAN " Trim reveal "...
- Page 7 1" (25) height increments from 10" (254) to 15" (381). Refer to the chart below for panel dimensions. F R A M E D P A N E L D I M E N S I O N S Refrigerator Door Panel Freezer Door Panel Handle Recess Location...
- Page 8 Planning Information Built-In Model 650 O V E R L A Y P A N E L S Spacer Panel .10" Overlay Panel " Backer Panel " " Door/ Drawer/ Grille Trim " Three panel assembly—cross section Overlay Panel Spacer Panel Backer "...
- Page 9 Planning Information Built-In Model 650 Overlay Door Panels Overlay Grille Panel *The overlay refrigerator door panel will require a recessed area to prevent the unit's lower hinge plate from hitting the door panel. Refer to page 10 for detailed information.
- Page 10 Planning Information Built-In Model 650 O V E R L A Y P A N E L S Overlay Panel 1 /4 "(6) Backer Panel Spacer Panel 3" (76) 1 /2 " Bottom Edge – (13) Hinge Side (rear view) 3 /8 "...
- Page 11 Planning Information Built-In Model 650 S I D E P A N E L S " (337) " " (606) BEHIND FRAME 4" (102) 3" (76) Cut-outs for grille and toe kick area Dimensions in parentheses are in millimeters unless otherwise specified. S I D E P A N E L S Side panels can be used with the framed, overlay and stainless steel design applications.
- Page 12 Planning Information Built-In Model 650 H A N D L E P R O F I L E – F R A M E D A P P L I C A T I O N OPTIONAL EXTENDED FULL-LENGTH HANDLE 1"...
- Page 13 Planning Information Built-In Model 650 H A N D L E P R O F I L E – S T A I N L E S S S T E E L / O V E R L A Y A P P L I C A T I O N S STANDARD STAINLESS STEEL HANDLE 1"...
- Page 14 Planning Information Built-In Model 650 P A N E L A N D H A N D L E P R O F I L E – 1 3 0 ˚ D O O R O P E N I N G SUB-ZERO UNIT DOOR CLOSED APPROX...
-
Page 15: Overlay Panel Application - 90 Door Opening
Planning Information Built-In Model 650 O V E R L A Y P A N E L A P P L I C A T I O N – 9 0 ˚ D O O R O P E N I N G 90˚...