Preset Channels 0 ~ 9 : Instant Access; Programming; Operation - Standard Horizon HX290 Owner's Manual

6.8 PRESET CHANNELS 0 ~ 9 : INSTANT ACCESS

Ten user assigned channels can be programmed for instant access. Pressing
the key activates the user assigned channel bank.

6.8.1 PROGRAMMING

1. Select the desired channel to be saved into the Preset Channel bank us-
ing the or
2. Press and hold the
Channel number are flashing, then release the
3. Press the
nel (" " ~ " ").
4. Press the
bank.
5. Repeat steps 3 and 4 to program the other channel into the Preset Chan-
nels, if desired.
6. To delete a Preset Channel, select the Preset Channel number to be de-
leted using the
Preset Channel number is removed from the display, and the Preset Chan-
nel number is changed to the next Preset Channel number.

6.8.2 OPERATION

1. Press the
The "P" icon and Preset Channel number will appear on
the display.
2. Press the
nels (" " through " ").
3. To exit from the Preset Channel mode, press the
will revert to the channel you were on prior to switching to the Preset Channel
mode.
Page 22
key.
key until the "P" icon and Preset
or key to select the desired Preset Chan-
key to program the current channel into the Preset Channel
or key, then press and hold the
key to change the transceiver to the Preset Channel mode.
or key to select the desired Preset Chan-
key.
key until the
key. The transceiver
HX290