Data; Timer; Alarm; Nike Electrolite - Nike HRM TRIAX 15 User Manual

NOTE: When the countdown is complete for both segments, the cycle repeats. For
example, when segment 1 is completed, segment 2 will begin. Segment 1 will begin at the
completion of segment 2.
STOP THE TIMER DURING COUNTDOWN
Press STOP.
RESET TIMER
When timer is stopped, press ADJUST/RESET.
Display returns to the original starting point.

ALARM

In ALARM mode you can set an alarm that will sound for 20
seconds, or until any button is pressed.
SET THE ALARM
See Making Adjustments to Mode Settings.
Note: The alarm is active only in the time zone for which it is set.
TURN THE ALARM ON AND OFF
Press START/LAP.
The word ON toggles off and on each time you press the button.
14 15
ILLUMINATE THE DISPLAY
You can illuminate the display by pressing ELECTROLITE.
Activating the auto-Electrolite display feature illuminates the display at the
press of any button.
ACTIVATE THE AUTO-ELECTROLITE FEATURE
Press and hold ELECTROLITE for about 2 seconds.
The symbol appears. The Electrolite display will illuminate at the press of
any button.
DE-ACTIVATE THE AUTO-ELECTROLITE FEATURE
Press and hold ELECTROLITE for about 2 seconds. The
Note: To conserve battery life the auto-Electrolite feature will automatically turn off after
12 hours.
WHAT IF THERE IS NO HEART RATE READING OR IT IS
EXTREMELY ERRATIC?
• You may not have wet the sensors enough. If you are wearing the chest
transmitter over clothing, try getting the clothing wet also.
• Sources of electromagnetic fields like appliances, computers and power
lines can cause interference. Other heart rate monitors can cause
interference also.
• You may not have the chest transmitter positioned correctly. Make sure
the sensors (the grooved part) are flat against the skin.
• The battery on the chest transmitter may be weak. The battery should
last for about 16 months if used one hour per day.
NIKE ELECTROLITE DISPLAY
symbol disappears.

TROUBLESHOOTING