Table of Contents
Advertisement
Quick Links
Contents
Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Set Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Set Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Calibrate the SDM Pod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Chronograph . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting Pace Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the Auto-Lap Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Setting "My View" Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting Training Intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Review Saved Runs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Running Pace Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Linking the SDM Pod to the Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
www.niketiming.com
This document with updates is available online at
Printed on Wood Free Paper
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nike V10
Summary of Contents for Nike V10
-
Page 1: Table Of Contents
Contents Quick Start ............... . 2 TIME mode Set Time . -
Page 2: Quick Start
Quick Start Follow steps through to position the SDM pod and go for a run. Remove the top strap and Loosen shoe laces and slide unseat the SDM pod from pod clip under laces. the bottom clip. Secure the SDM pod with Turn SDM pod ON. - Page 3 RUN mode views Start Run Chronograph View Pace View No Pace Displayed If you see four blinking lines in the display, the watch is Distance View not receiving transmission from the SDM pod. Run through the Quick Start again or see page 17 Scroll to Troubleshooting.
-
Page 4: Time Mode
Set Time In TIME mode you can set the time, date and power save option. TIME mode is the only mode in which you can turn the button chime ON and OFF. Follow steps through to set the time and date. 4 sec Switch Time Zones Hold 1 sec to view... -
Page 5: Set Alarm
Set Alarm Within TIME mode you can set two alarms. Follow steps through to set the alarms. EXIT (Alarm On) Turn Alarm ON /OFF The alarm icon will 3 sec show in the display of any mode when the alarm is turned ON. Scroll to TIME mode Press button to select... -
Page 6: Run Mode
Auto-Calibrate the SDM Pod Once calibrated, the Speed Distance Monitor (SDM) pod is more than 97% accurate for most runners. Calibrate the SDM pod by running 400-800 meters on a marked track, then adjust the watch to exact distance. The SDM pod will need to be calibrated each time you replace the watch battery. - Page 7 1.050 (5% above). to OFFSET. NOTE: Write down and save your offset value. It will come in handy if you let friends or family borrow the Triax V10 and they change the calibration setting.
-
Page 8: Using The Chronograph
Using the Chronograph In Chronograph View, you can mark lap times and total times during your run. Both lap times and total times are Mark Laps LAP 1 Lap time is the time required captured simultaneously when you press the lap button. to go once around a track or Average pace is also captured for each lap/ total period. - Page 9 ... Save or Clear Run Information LAP 2 LAP 3 LAP 4 3 sec Save Run TOTAL 2 TOTAL 3 TOTAL 4 Run information is saved to DATA mode. See Page 14 for DATA mode. 3 sec Mark Mark Lap /Total Lap /Total Clear Run Stop Run...
-
Page 10: Setting Pace Zone
Setting Pace Zone The speed at which your run or walk is your pace. Pace is measured in minutes per mile or kilometer. Setting pace zones allows you to train within a fast or slow pace limit. With the pace zone turned “on”, the watch will display HI and LO arrows to indicate you are running outside of your zone. -
Page 11: Setting The Auto-Lap Feature
Set the Auto-Lap Feature The chronograph contains an Auto-Lap feature which will automatically mark a lap after a determined distance. You cannot manually mark laps when Auto-Lap is activated. Follow steps through to set up the Auto-Lap feature. EXIT 3 sec Scroll to RUN mode. -
Page 12: Setting "My View" Display
Setting “My View” Display “My View” allows you to create your own view in RUN mode with the information you use the most during your workout. When activated My View will appear as the first view in RUN mode. This feature allows you to choose which information appears in the Primary (larger) and the Secondary (smaller) displays. -
Page 13: Interval Mode
Setting Training Intervals INTERVAL mode features a 5 segment countdown timer. You can use this as an interval training tool by setting the individual segments as a timed interval or a specified distance. As each segment is complete, as either a set time or specified distance;... -
Page 14: Data Mode
Review Saved Runs In DATA mode you can review detailed information about your saved runs. The memory can store multiple runs with up to 100 laps each. See page 9 for saving runs to DATA mode. Total time and segment data completed in INTERVAL mode will also be available for review in DATA mode. -
Page 15: Running Pace Chart
Running Pace Chart Use this chart to determine your pace (time per distance) for common races and finishing times. Pace (minutes per mile) 12:00 11:30 11:00 10:30 10:00 9:30 9:00 8:30 8:00 7:30 7:00 6:30 6:00 5:30 5:00 /mi* Pace (minutes per kilometer) 7:28 7:09... -
Page 16: Linking The Sdm Pod To The Watch
Linking the SDM Pod to the Watch The SDM Pod has a unique digital ID to avoid crosstalk with other pods. Before your pod can communicate properly, the watch must be linked to the SDM pod to establish and share this ID. The original pod which came with the watch was linked at the factory. -
Page 17: Troubleshooting
(2) This device must accept any interference that may cause undesired operation of the device. Tested to comply with FCC standards. For home or office use. FCC WARNING: Changes or modifications not expressly approved by Nike could void your authority to operate this device under FCC regulations. -
Page 18: Battery
Utilizing the Power Save function will help conserve battery life. Battery Replacement: Follow steps below to replace your watch battery. For best results, you can have Nike’s authorized service center change the watch battery. Using a coin, unscrew Twist and remove... -
Page 19: Specifications
Case: Polycarbonate duration of this limited warranty. In no event shall NIKE be liable for direct, indirect, incidental or consequential damages arising out of the use of the Buckle: Stainless Steel watch, and any recovery is limited to the purchase price.
Need help?
Do you have a question about the V10 and is the answer not in the manual?
Questions and answers