Advertisement
*EN FINAL (Stopwatch) 3.
b
CHRONOGRAPH
In CHRONOGRAPH mode you can measure and record lap times and split times for up to ten
laps. Recorded times are accessed in DATA mode.
Lap time = time required to cover a segment of a run.
Split time = total elapsed time up to the completion of a lap.
Start measuring a lap
Press START/LAP.
Display begins with 1/100 seconds, then seconds, then
minutes, then hours. If accumulated times proceed to
hours, 1/100 seconds are replaced by hours display.
Mark lap completion and start next lap measurement
Press START/LAP.
Completed lap number appears above the time display.
Lap time appears for 4 seconds, then split time appears
for 4 seconds, then display returns to overall time.
Stop measuring a lap
Press STOP/RESET.
Counting stops and "STP" appears in the display. Total
elapsed time appears.
12/7/99
3:54 PM
Page 8
8
Restart a lap measurement
Press START/LAP.
Counting continues.
Reset chronograph
Chronograph must be stopped to reset.
Press STOP/RESET.
Chronograph resets.
9
Advertisement
