Advertisement
*EN FINAL (Stopwatch) 3.
a
TIME
In TIME mode you can view time and calendar information.
Set time of day
1 In TIME mode, press and hold ADJUST for 2 seconds.
Seconds designator blinks.
Note that the adjustable element is always blinking.
If no buttons are pressed for 2-3 minutes the watch
will exit ADJUST mode and return to TIME mode.
2 Press START/LAP to reset seconds to zero.
3 Press STOP/RESET to advance to the next
programmable element.
Hours begin blinking.
12/7/99
3:54 PM
Page 6
6
4 Press START/LAP to advance one hour.
Hold for quick advance.
5 Press STOP/RESET to advance to the next
programmable element.
6 Repeat steps 2-4 until all the elements are set: Seconds,
hours, minutes, weekday, year, month, date, and 12/24
hour display.
7 Press ADJUST to save changes.
Time is set and no elements are blinking.
7
Advertisement
