Advertisement
Tempest Manual 4.0
6/8/99
11:18 AM
Time zone change
1 In TIME mode, press and hold the SPLIT/RESET button.
The alternate time zone information appears.
2 Release the button when time zone indicator stops
flashing.
3 Follow the preceding instructions to set the time and
calendar information for the alternate time zone.
Hold the SPLIT/RESET button for less than 3 seconds for brief
glimpse of alternate time zone information.
Turn on and off the confirmation sound
In TIME mode, press START/STOP.
When the
symbol is showing a tone will sound at the
press of any functional button (except adjust mode).
Page 8
8
b
CHRONOGRAPH
In CHRONOGRAPH mode, you can
monitor split and total elapsed time
in 1/100th of a second increments
for up to one hour, after which
time is measured in one second
increments. The maximum time
measurement is 100 hours.
Split time refers to the amount
of time it takes to complete
one portion of a run.
To start measuring elapsed time
Press START/STOP button.
Time measurement begins with 1/100 seconds, then
seconds, then minutes. If the accumulated time
proceeds to hours, the elapsed hours appear above
the minutes:seconds display.
To check split time during time measurement
Press SPLIT/RESET button.
Split time will be displayed for seven seconds, as time
measurement continues uninterrupted.
9
START /S TO P
A D J U S T
M O D E
SP LIT/ RES ET
E LE CTROL ITE
STOP M A RK
Advertisement
