Using The Chronograph - Nike V10 Quick Start Manual

Using the Chronograph

In Chronograph View, you can mark lap times and total
times during your run. Both lap times and total times are
captured simultaneously when you press the lap button.
Average pace is also captured for each lap/ total period.
After you stop the chronograph, you can save your run
information and review it in DATA mode. See page 14
for DATA mode. Follow steps
your chronograph.
Scroll to
RUN mode
Press button to switch views
at any time during your run.
CHRONOGRAPH Pace
View View
through to use
Distance My View
View See page 12
for setup
Mark Laps
Lap time is the time required
to go once around a track or
complete a segment of a run.
and
Mark Totals
Total time is the time from
the beginning of the run up
to the point you mark.
Start Run
A blinking
stopwatch
will appear.
Auto-Lap ON
You cannot manually mark laps if the
Auto-Lap feature is ON. See page 13,
Set the Auto-Lap Feature, to turn
the feature ON / OFF.
8
LAP 1
TOTAL 1
4
Mark Lap /Total
You will have 7
seconds to read
your lap and
total time.
Average pace is
also captured
for each
lap / total period
and can be
viewed in DATA
mode if the run
is saved.