Operation Method; Optional Functions; Timed Operation; Child Lock - Panasonic NA-127XB1L01 Instructions Manual

Operation Methods
1.Open the door and put the laundries into the
drum.
For details on preparation and laundries, see
P12, P18-19.
2.Close the door, and turn on the water tap.
Caution
- Make sure that no laundries are caught by
the door.
-
Do not put too many laundries in the drum.
-
This may cause excessive vibrations or
damage to the washing machine.
3.Insert the power plug and turn on 【 Power 】
Button.
4.Select the program knob to set the desired
washing program.
■ The time required for washing is displayed on
the panel.
5.Select additional functions and other settings
In standby status, the selected functional items
blink, and indicators for other optional function
items are on. If other items are optional when a
function is in "pause" status, the indicators for
the current items blink. If other functions are not
optional when a function is in "pause" status, the
indicators for the current items are on.
Soak: (see P16 for details).
Extra Rinse: An additional rinse cycle enables
Prewash: (see P16 for details).
Easy Iron: (see P16 for details).
Eco.: (see P16 for details).
For details on optional functions and
settings for each program, see P18-19.
20
※ The above figure is based on
cotton program.
6.Press 【 Start /Pause 】 button.
indicates the remaining
time before water entry.
The buzzer sounds, and the operation
is finished.
Caution
- Be sure to apply "additional rinse" function
if detergent on the laundries are not
completely removed using the basic
washing programs.
-
The laundries should not be left in the drum
for a long time to prevent color fading,
deformation and folding.
-
If the program is running, and you turn the
knob to make it depart from the position of
the current program, the buzzer will sound,
indicating invalid operation. In this case,
however, the set functions and the remaining
time set remain unchanged. The program
cannot be paused if you press 【 Start/
Pause 】 . In this case, the buzzer will
sounds, indicating invalid operation, and
"EP" blinks at the "remaining time" window.
The program cannot be paused unless you
turn the knob to the correct position of the
program. Or, you can press 【 Power 】
to re-select to start the program.

Timed operation

Select the duration from the current time to the
end time.
- Time saver is not available for the following
functions:【 T u b C l ean 】.
-
The actual operation duration may differ from the
preserved duration, depending on the type of
laundry, temperature conditions and water inlet/
drain conditions.
Caution
- Do Not use detergent that is hard to
dissolve during saver function, as blocks
may be formed before washing in this case.
As a result, the detergent may fail to flow out.
To set timed operation, do the following:
1.Press 【 Power 】 button to power on the
machine.
2.Select the required program and optional functions.
3.Set the preset time.
Continuously press 【Preset】 button until the
required time is displayed.
Press 【Start/Pause】button to complete
4.
saver setting.
Be sure to re-set in steps as described above after
power-off.
Cancelling preset time
Press 【 Power 】 button to cancel all settings.
Viewing preset time setting
The remaining time is displayed when preset time set

Optional functions

Child lock

- The door and buttons must be locked to
prevent a child from entering the drum.
-
Setting and release of child lock:
-
Setting:After starting the course , hold down
【 Water Temp 】 + 【 Spin Speed 】
at the time for 3 seconds to set this function.
to set this function. The indicator lamp is on
after setting, until the operation is finished.
-
Release:After starting the course , hold
down 【 Water Temp 】 + 【 Spin Speed 】
at the time for 3 seconds to set this function.
to set this function. The function will be
canceled.
The following example describes how to use the
child lock:
- Put the laundries into the drum, select the
program and run the machine. Set "child lock".
"Child Lock" indicator lamp lights up and
The child lock is in a "locked" status during
operation of the machine.
The lock is released after the operation.
.
21