Remote Control Battery Installation; Remote Control Receivers And Operating Range; Wired Remote Control Transmitter - Sanyo PLC-ZM5000 Owner's Manual

Open the battery
1
compartment lid.
To ensure safe operation, please observe the following precautions :

Remote Control Receivers and Operating Range

Point the remote control toward the projector (to
Infrared Remote Receivers) when pressing the buttons.
Maximum operating range for the remote control is
about 16.4' (5 m) and 60 degrees in front, back and top
of the projector.
Infrared Remote Receivers are provided in front, back
and top of the projector. You can conveniently use all of
the receivers (pp. 10, 11, 59).
Note:
The remote control can be used as a wired remote
control. Wired remote control helps you use the remote
control outside of the operating range (16.4'/ 5 m).
Connect the remote control and the projector with the
remote control cable (sold separately). Connected with
the remote control cable, the remote control does not
emit wireless signal.

Remote Control Battery Installation

Install new batteries into
2
the compartment.
and install new batteries.
rule or guidelines.

Wired Remote Control Transmitter

Part Names and Functions
Replace the
3
compartment lid.
Two AAA size
batteries
For correct polarity
(+ and –), be sure
battery terminals are
in contact with pins
in the compartment.
16.4'
(5 m)
16.4'
(5 m)
15