Power Control And Status Check - Sanyo PLC-ZM5000 Owner's Manual

Chapter 4 Controlling the Projector
Warning temperature icon
Item
PJ status
Power .........................Displays the status of the lamp. (ON, OFF, On starting up, On cooling down,
Status ..........................Displays the status of the projector's power. (Refer to next page.)
Power control ........Controls the projector power by clicking the "ON" or "Standby" button.
PJ temp.
External temp. A ..Displays the surrounding temperature of the intake vent.
Inside temp. A ......Displays the surrounding temperature of lamp in the projector.
Inside temp. B .......Displays the surrounding temperature of panel in the projector.
* The warning icon will appear if the temperature exceeds a specified value. Check if there is no
object to obstruct the airflow around the intake or exhaust vent. It might be airfilter clogged.
Replace the airfilter with new one.
* The temperature unit can be set either Centigrade or Fahrenheit in the item "Initial Setting".
( p.22)
The projector cannot be turned on while the projector is on cooling down.
The web browser checks and updates the projector's condition every 30 seconds automatically.
32

Power control and status check

Click Power & Status on the main menu. The control page will be dis-
played.
By clicking ON or Standby button on the page, the power of the projector
can be controlled.
Description
Service in need)
Confirmation window as
shown in the below appears
when the button is
Standby
pressed.
Popup confirmation window