Sanyo PLC-ZM5000 Owner's Manual page 44

Computer Input
Keystone
This function is used to adjust keystone distortion of the
projected image. Use the Point
item you want to adjust.
Standard
Adjust the Horizontal/Vertical keystone distortion of the
projected image.
Corner correction
Adjust the corner distortion of the projected image.
Corner pattern
Choose a Corner pattern mode among Red, White, Blue,
and Off.
Store
Store .... Keep the keystone correction even when the
AC power cord is unplugged.
Reset.... Release the keystone correction when the
AC power cord is unplugged.
Press the KEYSTONE button on the remote control
to switch the Standard (for Vertical/Horizontal) /
Corner correction adjustment. The Standard or Corner
correction adjustment dialog box appears. Use the Point
buttons to correct the Standard or Corner
distortion (p.31).
Ceiling
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Screen aspect
This function is used to project the image to a 4:3 or 16:9
projection screen.
Default (16:10) ....16:10 is the aspect of the LCD panel.
16:9 ..................... Set to a 16:9 projection screen.
4:3 ........................Set to a 4:3 projection screen.
Reset
This function returns all adjusted values to the factory
default settings. Press the SELECT button at Reset to
display a confirmation box. To reset, press the SELECT
button at Yes.
44
buttons to choose the
The original Screen Menu is available.
Keystone
Ceiling
Rear
Note:
Natural wide
720p 1035i 1080i
Wide (16:9)
Natural wide
1080p