Remote Control - Sanyo PLC-ZM5000 Owner's Manual

STAND-BY button
Turn the projector off (p.24).
SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.
ON button
Turn the projector on (p.23).
SHUTTER button
Close and open up the built-in shutter (pp.27,
29).
MENU button
Open or close the On-Screen Menu (p.25).
POINT ( VOLUME – / +, MUTE)
buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
button) (p.28).
L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.32).

Remote Control

R-CLICK button
Act as the right mouse button for wireless
mouse operation (p.32).
SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
MOUSE POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (p.32).
AUTO PC button
Automatically adjust the computer image to its
optimum setting (pp.29, 37).
INPUT button
Select a signal (pp.33-35).
To ensure safe operation, observe the
following precautions:
– Do not bend, drop, or expose the remote control
to moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any other chemical
materials.
Part Names and Functions
13