Side Control And Indicators - Sanyo PLC-ZM5000 Owner's Manual

Part Names and Functions
Side Control
ON/STAND-BY button
Turn the projector on or off (pp.23-24).
MENU button
Open or close the On-Screen Menu (p.25).
SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the
Digital zoom mode (p.43).
SHUTTER button
Close and open up the built-in shutter (p.27).
Point ( VOLUME – / + buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode
(p.43).
buttons) (p.28).
LENS button
Enter the focus, zoom, and lens shift
adjustment mode (p.27).
INPUT button
Select an input source (pp.33-35).
12

Side Control and Indicators

Indicators (on the top panel)
POWER indicator
– Light green while the projector is in stand-
by mode.
– Light green during operations.
– Blink green in the Power management
mode (p.59).
LAMP indicator
Light red during operations.
WARNING TEMP. indicator
Blink red when the internal temperature of
the projector exceeds the operating range
(pp.72, 79-80).
WARNING FILTER indicator
– Blink slow when the filter is being scrolled
(pp.66, 79).
– Blink fast when the filter scroll is not
working properly or the filter cartridge is not
installed (pp.66, 81).
– Light orange when the clogging of the filter
is detected or the filter counter reaches
a time set in the timer setting, urging
immediate filter/ filter cartridge replacement
(pp.65, 66, 81).
SHUTTER indicator
Light blue when the shutter is closed (p.79).
LAMP REPLACE indicator
Light orange when the projection lamp
reaches its end of life (pp.69, 80).