Adjusting The Brightness Of The Leds; Changing The Functions Of The Rotary Encoders; Adjusting The Brightness/Contrast Of The Lcd - Sony RCP-750 Operation Manual

Initial Settings
Adjusting the Brightness of the
LEDs
You can adjust the brightness of the LEDs of the panel
buttons and camera number/tally indication window.
To adjust the brightness, proceed as follows.
1
[RCP Adjusting]
Press
menu to display the RCP adjustment menu.
2
[LED Bright]
Press and light
The lower half of the display becomes the LED
Brightness adjustment display.
Clear
Buzzer LED
Volume Bright
LED
Bright
Switch Tally Other
50 50
3
Adjust the brightness with the corresponding
control knobs (50 is the standard value with all
items).
Switch: Brightness of the built-in LEDs of the
control buttons
Tally: Brightness of the built-in LEDs of the
camera number/tally indication window
Other: Brightness of the other LED indicators/
lamps, including the master black indicator and
f-number indicator
The master brightness can be adjusted with the
rightmost control knob (Master).
When the adjustment is completed
[Exit]
Press to leave the menu.
Changing the Functions of the
Rotary Encoders
You can change the functions of BLACK/FLARE
control knobs and DETAIL control knob.
Proceed as follows:
24(E)
on the RCP Configuration
.
Exit
Master
50 50
1
[RE Setting]
Press on the RCP Configuration
menu to obtain the Rotary Encoder Setting display.
Rotary Encoder
Setting
BLACK/FLARE
Black Flare
2
When changing the function of the BLACK/
FLARE control knobs, press
desired.
When changing the function of the DETAIL
[Detail $HD%]
control knob, press
[SD Detail]
as desired.
When the adjustment is completed
[Exit]
Press to leave the menu.
Adjusting the Brightness/
Contrast of the LCD
You can adjust the brightness and contrast of the
display of the menu control block.
Proceed as follows:
1
[LCD]
Press on the Maintenance menu to display
the LCD setting display.
Clear
LCD Brightness
/Contrast
Bright
Contrast
50 50
2
Adjust the brightness and contrast with the
corresponding control knobs (50 is the standard
value with both items).
When the adjustment is completed
[Exit]
Press to leave the menu.
Exit
DETAIL
Detail SD
( HD )
Detail
[Black] [Flare]
or as
or
Exit